SMC Double Action Pneumatic Pin Cylinder, CDJP2B16-40D

  • RS-stocknr. 547-631
  • Fabrikantnummer CDJP2B16-40D
  • Fabrikant SMC
Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: JP
Productomschrijving

Cylinders

Bore sizes 6, 10, 16mm
Magnetic piston standard
Compact design
Lubrication not required
Male-threaded rod end
IP67 rated
Proof pressure 1.05 bar
Operating pressure 1.2 bar, 6mm dia and 0.6 bar, 10mm/16mm dia (min) 7 bar (max)
Ambient and fluid temperature -10ºC to +60°C
Stroke tolerance +1.0mm, -0mm
Rubber bumper cushion at both ends

Specificaties
Kenmerk Waarde
Manufacturer Series CJP2
Action Double
Rods Single
Bore 16mm
Stroke 40mm
Piston Speed 50 → 500mm/s
Maximum Operating Pressure 0.7 MPa
Cushioning Type Rubber
Port Connection M5 x 0.8
Dimensions 83.5 x 20 x 24.5mm
Weight 71g
Minimum Piston Speed 50mm/s
Maximum Operating Temperature +70°C
Width 20mm
Maximum Piston Speed 500mm/s
Minimum Operating Temperature -10°C
Length 83.5mm
Height 24.5mm
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
42,51
(excl. BTW)
51,44
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
42,51 €
5 - 9
41,22 €
10 +
39,88 €
Related Products
FESTO ADN series of compact pneumatic cylinder are ...
Description:
FESTO ADN series of compact pneumatic cylinder are up to 50% smaller than standard pneumatic cylinders for maximum productivity in confined spaces. These double acting pneumatic actuators have dual connection ports for compressed air to be applied for advancing and ...
Compact single and double acting cylinders, considerably shorter ...
Description:
Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs. Space and weight savingMagnetic pistonProof pressure 15barOperating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar maxSupplied with tapered and parallel ports.
The solution for a linear-actuator subject to high ...
Description:
The solution for a linear-actuator subject to high loads. Ideal for material handling applications. Two types of guide rod bearing for different applications. The overall package is very compact and pre-tapped mounting holes ensure easy attachment of fixtures. Compact guide ...
The CXS range of Dual-Rod Cylinders come with ...
Description:
The CXS range of Dual-Rod Cylinders come with slide bearings (CXSM type and CXSJM) or ball bearing slides (CXSL and CXSJL type). This range of cylinders is suitable for ’pick-and-place’ applications, operating with non-lubricated, filtered and compressed air. The Dual-Road ...