SMC Double Action Pneumatic Pin Cylinder, CDJP2B6-5D

  • RS-stocknr. 547-629
  • Fabrikantnummer CDJP2B6-5D
  • Fabrikant SMC
Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: JP
Productomschrijving

Cylinders

Bore sizes 6, 10, 16mm
Magnetic piston standard
Compact design
Lubrication not required
Male-threaded rod end
IP67 rated
Proof pressure 1.05 bar
Operating pressure 1.2 bar, 6mm dia and 0.6 bar, 10mm/16mm dia (min) 7 bar (max)
Ambient and fluid temperature -10ºC to +60°C
Stroke tolerance +1.0mm, -0mm
Rubber bumper cushion at both ends

Specificaties
Kenmerk Waarde
Manufacturer Series CJP2
Action Double
Rods Single
Bore 6mm
Stroke 5mm
Piston Speed 50 → 500mm/s
Maximum Operating Pressure 0.7 MPa
Cushioning Type Rubber
Port Connection M3 x 0.5
Dimensions 38 x 14 x 16.5mm
Weight 16g
Minimum Piston Speed 50mm/s
Maximum Operating Temperature +70°C
Width 14mm
Length 38mm
Height 16.5mm
Maximum Piston Speed 500mm/s
Minimum Operating Temperature -10°C
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
10 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
28,98
(excl. BTW)
35,07
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
28,98 €
5 - 9
28,10 €
10 +
27,18 €
Related Products
Double actingOperating pressure 1 – 6 barTemperature range ...
Description:
Double actingOperating pressure 1 – 6 barTemperature range 0°C to 60°COpening angle 30°(open), 10°(closed)Holding moment at 5 bar is 0.1Nm (10mm bore), 0.4Nm (16mm), 0.7Nm (20mm), 1.4Nm (25mm)Repeatability of closing position ±0.01mmMaximum operating frequency 180cpmLubrication not required.
The MHL series from SMC are air grippers ...
Description:
The MHL series from SMC are air grippers ideal for gripping different sized parts. These pneumatic grippers are designed with dual piston construction creating a compact gripper with a large holding force. Wide opening air gripperParallel styleAuto switch capable.
The MHF two finger pneumatic gripper compact design ...
Description:
The MHF two finger pneumatic gripper compact design reduces bending moment, improves positional accuracy and saves space. Its double piston gripper construction provides a powerful griping force while remain compact and mounting flexibility is achieved by removing the need for ...
SMC CQM Compact Guided/Guide Rod cylinders can accommodate ...
Description:
SMC CQM Compact Guided/Guide Rod cylinders can accommodate direct loads, offer a lateral load resistance that is two to four times greater than SMC series CQ cylinders, and include mounting points that are compatible with SMC CQS and CQ2 series ...