SMC 8mm FEP, Nylon, PFA, Polyurethane, Soft Nylon Blanking Plug

  • RS-stocknr. 907-5930
  • Fabrikantnummer KQ2C08-00A
  • Fabrikant SMC
Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: JP
Productomschrijving

Tubing Cap KQ2C

The KQ2C one-touch tube caps are used to plug unused nylon and polyurethane tubes. The special profile design of these fittings provides positive sealing under pressure. When the tubing cap is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively.

The special profile design of the seal provides positive sealing under pressure without reduced flow
Release button allows tube to be removed easily without damage
Maximum operating pressure 10 bar
Maximum vacuum operating pressure -100kPa
Proof pressure 3MPa
Ambient and fluid temperature -5 to +60°C (water 0 to 40°C)

Note

Models with a -X2 suffix in the Mfr Part No. are copper-free (electroless nickel plated).

Tube-to-Tube Fittings & Plugs

Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance.

Maximum operating pressure 10 bar
Maximum vacuum operating pressure -100kPa
Proof pressure 3MPa
Ambient and fluid temperature -5 to +60°C (water 0 - 40°C)

Specificaties
Kenmerk Waarde
Tube Size 8mm
Material FEP, Nylon, PFA, Polyurethane, Soft Nylon
Product Type Tube Cap
Overall Length 20.5mm
Outer Diameter 15.2mm
For Use With KQ2 Series
280 op voorraad - levertijd is 1 werkdag(en)
Prijs Each (In a Pack of 5)
1,264
(excl. BTW)
1,529
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
1,264 €
6,32 €
*prijsindicatie
Related Products
Plastic Caps For THK's range of linear slide ...
Description:
Plastic Caps For THK's range of linear slide rails. Ideally used for the prevention of foreign material entering the LM block structure. Made From Synthetic ResinHigh Oil ResistanceHigh Wear ResistanceExcellent Durability.
Hexagon headed male parallel thread blanking plug. Manufactured ...
Description:
Hexagon headed male parallel thread blanking plug. Manufactured from steel to BS5200 with a zinc chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 ...
Blanking plugs for ports, male metric thread. Manufactured ...
Description:
Blanking plugs for ports, male metric thread. Manufactured from steel to BS5200 with a zinc chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 ...
Made from glass-fibre reinforced technopolymerNBR synthetic rubber sealsSolvent, ...
Description:
Made from glass-fibre reinforced technopolymerNBR synthetic rubber sealsSolvent, oil, grease, chemical resistantMaximum working temperature 130°CGraphic function symbol on plug cap.