SMC 8mm C3604, PBT, PP Cap

  • RS-stocknr. 873-2682
  • Fabrikantnummer KQ2C08-00A
  • Fabrikant SMC
Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: JP
Productomschrijving

Tubing Cap KQ2C

The KQ2C one-touch tube caps are used to plug unused nylon and polyurethane tubes. The special profile design of these fittings provides positive sealing under pressure. When the tubing cap is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively.

The special profile design of the seal provides positive sealing under pressure without reduced flow
Release button allows tube to be removed easily without damage
Maximum operating pressure 10 bar
Maximum vacuum operating pressure -100kPa
Proof pressure 3MPa
Ambient and fluid temperature -5 to +60°C (water 0 to 40°C)

Note

Models with a -X2 suffix in the Mfr Part No. are copper-free (electroless nickel plated).

Tube-to-Tube Fittings & Plugs

Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance.

Maximum operating pressure 10 bar
Maximum vacuum operating pressure -100kPa
Proof pressure 3MPa
Ambient and fluid temperature -5 to +60°C (water 0 - 40°C)

Specificaties
Kenmerk Waarde
Tube Size 8mm
Material C3604, PBT, PP
For Use With KQ2C Series
Product Type Tube Cap
Overall Length 20.5mm
Outer Diameter 15.2mm
30 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
11,554
(excl. BTW)
13,98
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
11,554 €
57,77 €
25 - 45
11,084 €
55,42 €
50 - 120
10,84 €
54,20 €
125 +
10,604 €
53,02 €
*prijsindicatie
Related Products
ENOTS compression fittings are ideal for most general ...
Description:
ENOTS compression fittings are ideal for most general industrial applications. Manufactured entirely from extruded brass bar or hot brass stampings, they can be used under extreme conditions of pressure and temperature, limited for all practical purposes only by the tubing ...
The Ermeto DIN male stud high-pressure hydraulic tube ...
Description:
The Ermeto DIN male stud high-pressure hydraulic tube fittings from Parker are able to connect to various different-sized tubes and hoses. These fittings have excellent corrosion resistance which extends the life cycle of the fittings. Pressure ratings of up to ...
ENOTS compression fittings are ideal for most general ...
Description:
ENOTS compression fittings are ideal for most general industrial applications. Manufactured entirely from extruded brass bar or hot brass stampings, they can be used under extreme conditions of pressure and temperature, limited for all practical purposes only by the tubing ...
Can be used with the PM range of ...
Description:
Can be used with the PM range of metric size fittings which have been specially produced for foodstuff and potable liquids. They are also suitable for air and inert gases making them ideal for use in the pub trade. • ...