SMC Automatic G 3/4 400cm3/min Pneumatic Drain, 183 x 112 x 112mm

  • RS-stocknr. 234-2003
  • Fabrikantnummer AD600-06
  • Fabrikant SMC
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: JP
Productomschrijving

Pneumatic Auto Drain - AD Series

SMC AD series automatic drip leg drain. Automatic drains are an efficient way of removing condensates such as water from your pneumatic system. Removing the chance of emptying being overlooked and reducing the risk of damage to expensive equipment and downtime. Drop leg auto drains can be installed at low points in the system and with the tank to help stop condensation collecting.

Float type automatic drain valve
Bowl capacity 400cc/min (0.7MPa water discharge)
Temperature range -5°C to +60°C
Installed at low points in a compressed air system to drain off water

Note

For Bracket see 255005486.

//media.rs-online.com/t_line/L234198-01.gif
//media.rs-online.com/t_line/L724554-01.gif
Specificaties
Kenmerk Waarde
Manufacturer Series AD
Drain Type Automatic
Inlet Port G 3/4
Outlet Port G 3/4
Bowl Capacity 400cm³/min
Dimensions 183 x 112 x 112mm
Minimum Operating Temperature +5°C
Height 183mm
Minimum Operating Pressure 3bar
Depth 112mm
Maximum Operating Temperature +60°C
Inlet Port Thread Standard G
Width 112mm
Maximum Operating Pressure 9.9 bar
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
131,36
(excl. BTW)
158,95
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
131,36 €
5 - 9
127,36 €
10 +
123,25 €
Related Products
The SMC 5μm pneumatic filter regulator has a ...
Description:
The SMC 5μm pneumatic filter regulator has a G 3/8in port connection and a maximum operating pressure of 10bar. The regulator has a polycarbonate bowl. It is installed without an auto drain. Without backflow mechanismModular type filter regulatorWithout pressure gaugeWith ...
The SMC 5μm pneumatic filter regulator has a ...
Description:
The SMC 5μm pneumatic filter regulator has a G 1/4in port connection and a maximum operating pressure of 10bar. The regulator has a polycarbonate bowl. It is installed with a manual drain. Without backflow mechanismWith bracketWithout auto drainWithout pressure gauge. ...
IMI Norgren BL07 series pre-asswmbled ready-to-install filter, regulator ...
Description:
IMI Norgren BL07 series pre-asswmbled ready-to-install filter, regulator and lubricator combination sets, fitted with quick-release bayonet bowls, making the device easy to install and maintain. This Excelon design is a comprehensive range of modular FRL air preparation units supplied as ...
SMC’s AC-B series of filter regulator lubricators have ...
Description:
SMC’s AC-B series of filter regulator lubricators have been redeveloped and feature a double layer, transparent bowl for better level visibility and extended working life. Part of SMC’s modular air prep range the AC-B can be combined with other components ...