Festo Cable 2.5 M, Plug M8 Pneumatic Position Detector, IP67 30V ac/dc, SME-8 LED Indicator, 161756

Bekijk deze categorie

Subtotaal (1 eenheid)*

€ 49,22

(excl. BTW)

€ 59,56

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 26 stuk(s) vanaf 15 juni 2026
  • Plus verzending 6 stuk(s) vanaf 15 juni 2026
  • Plus verzending 19 stuk(s) vanaf 02 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 49,22

*prijsindicatie

RS-stocknr.:
175-4564
Artikelnummer Distrelec:
304-21-694
Fabrikantnummer:
SME-8-K-24-S6
Fabrikant:
Festo
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Festo

Product Type

Pneumatic Position Detector

Series

SME-8

Output Function

NO

LED Indicator

Yes

Housing Material

Polyethylene Terephthalate

Voltage

30V ac/dc

For Use With

T-Slot

IP Rating

IP67

Switching Action

NO Contact

Minimum Operating Temperature

-5°C

Measurement Principle

Proximity Sensor

Maximum Operating Temperature

120°C

Hazardous Area Certification

No

Standards/Approvals

No

Electrical Connection Type

Cable 2.5 M, Plug M8

Model Number

161756

Vrijgesteld

Festo SME-8 Series Pneumatic Position Detector, 30V Voltage, IP67 - SME-8-K-24-S6, Numeric Part Number: 161756


This pneumatic position detector is a Compact proximity device designed to monitor linear actuator positions within T-slot assemblies. It operates as a normally open switch, signalling position changes electrically while interfacing with automation systems via an M8 connector and attached cable. The unit is intended for industrial settings where sealed protection and elevated temperature tolerance are required.

Features & Benefits


• IP67-rated enclosure provides protection against dust and water ingress
• Polyethylene terephthalate housing resists chemical and mechanical wear
• LED indicator enables quick Visual confirmation of switching state
• Operates between -5°C and 120°C for broad ambient temperature use
• NO output compatible with 30V control circuits for straightforward integration

**Applications**


• Suitable for position sensing on pneumatic T-slot cylinders
• Ideal for conveyor end-of-travel detection in factory automation
• Used with pneumatic actuators in pick-and-place machinery
• Can be used for limit sensing in packaging and assembly lines

How is the unit connected electrically in a control panel?


It is fitted with an M8 plug and a 2.5 m cable allowing direct wiring to PLC inputs or junction blocks.

What signalling behaviour should I expect during operation?


The switch is configured normally open so it closes its contact when the target position is detected, allowing current flow up to the rated voltage.

How does the detector cope with harsh shop-floor conditions?


The IP67 protection and robust polymer housing minimise ingress and surface damage, preserving sensor function in wet or dusty environments.

Are there temperature constraints for mounting near heat sources?


The sensor is specified to function down to -5°C and up to 120°C, permitting placement near elevated-temperature components within that range.

Gerelateerde Links

Wees als eerste op de hoogte van onze nieuwste producten en aanbiedingen

E-mailadres

De persoonlijke gegevens die u aan ons verstrekt bij het aanmelden voor deze mailinglijst worden verwerkt in overeenstemming met ons privacybeleid.