SMC reed Pneumatic Sensor, IP67

  • RS-stocknr. 849-7092
  • Fabrikantnummer D-97
  • Fabrikant SMC
Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: JP
Productomschrijving

Sensors

A series of reed switches from SMC. These direct mounting style auto switches are suitable for use with air cylinders and are available with or without indicator light.

Specificaties
Kenmerk Waarde
Manufacturer Series D-97
Type Reed
LED Indicator Yes
IP Rating IP67
Minimum Operating Temperature -10°C
Maximum Operating Temperature +60°C
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
19 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
19,89
(excl. BTW)
24,07
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
19,89 €
5 - 9
19,27 €
10 +
18,67 €
Related Products
Festo SMT/SME-8M Series T-Slot proximity sensors are fully ...
Description:
Festo SMT/SME-8M Series T-Slot proximity sensors are fully compatible with all Festo cylinders that have T-slots. The SME/SMT series provide a reliable sensing solution in a variety of switching options. Sturdy central mounting guarantees that the sensor is securely screwed ...
The Aventics ST6 series 6mm T-slot reed pneumatic ...
Description:
The Aventics ST6 series 6mm T-slot reed pneumatic sensor works on the normally open operation and has a cable length of 5m. It has a yellow LED indicator light to indicate the ON/OFF status. This sensor is compatible with CCI, ...
The SMC D-A9 series 24VDC direct mount pneumatic ...
Description:
The SMC D-A9 series 24VDC direct mount pneumatic reed position detector utilizes a magnetic sensor for pneumatic actuation. It has built-in indicator lights and set screws. This detector has a 3m long lead wire that weighs 30gm. Durable vinyl sheath ...
The SMC D-M9 series 24VDC pneumatic sensor is ...
Description:
The SMC D-M9 series 24VDC pneumatic sensor is an M8, 3-pin, pre-wired device with a wire length of 500mm. The connector has 2-wire output style and in-line lead wire orientation. This switch has a red LED indicator that illuminates when ...