Festo NC Changeover Switch, Floating Contact Pneumatic Cylinder & Actuator Switch, SRBE Series

  • RS-stocknr. 164-1337
  • Fabrikantnummer SRBE-CA3-YR90-MW-22A-1W-C2N12-EX
  • Fabrikant Festo
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Sensor boxes SRBE are used for electrical feedback and control of the position of process valves actuated using pneumatic quarter turn actuators. They are suitable for use in potentially explosive environments. They can be mounted quickly and easily on quarter turn actuators with a connection pattern to VDI/VDE 3845 using mounting adapters.

Sturdy aluminium housing with two cable inputs
Captive stainless steel screws on the housing cover
Pre-assembled stainless steel mounting adapter 80x30 H20 for ease of mounting on standard actuators to VDI/VDE 3845
3D OPEN/CLOSED position indicator
Mechanical, inductive or magnetic switch variants
Number of switches: 2
NEMA 4/4x

Specificaties
Kenmerk Waarde
Manufacturer Series SRBE
Type Changeover Switch, Floating Contact
IP Rating IP67
Operation NC
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 12/02/2020, met een levertijd van 1 werkdag.
Prijs Each
166,32
(excl. BTW)
201,25
(incl. BTW)
Aantal stuks
Per stuk
1 +
166,32 €
Related Products
From Cynergy3, the SSF211 series and SSF212 series ...
Description:
From Cynergy3, the SSF211 series and SSF212 series are horizontal float switches. They operate in liquids with Specific Gravity (SG) of 0.8 or above. These float switches are constructed from a reed switch and pivoted actuator magnet. SSF211 and SSF212 ...
From Cynergy3, the SSF211 series and SSF212 series ...
Description:
From Cynergy3, the SSF211 series and SSF212 series are horizontal float switches. They operate in liquids with Specific Gravity (SG) of 0.8 or above. These float switches are constructed from a reed switch and pivoted actuator magnet. SSF211 and SSF212 ...
Position indicator SASF for sensor boxes SRBG. For ...
Description:
Position indicator SASF for sensor boxes SRBG. For mounting on drive shaft of standard actuators to VDI/VDE 3845Four fixed actuating lugs offset by 90°For clockwise and anticlockwise rotating actuators with 90° and 180° rotationMade from conductive plastic material, which prevents ...
D-M9 series solid-state magnetic sensor for pneumatic actuators. ...
Description:
D-M9 series solid-state magnetic sensor for pneumatic actuators. These pneumatic switch sensors are the output style: 2 wire. The enclosure rating is watertight with a rating of IP67. The D-M9 is available in an optional two colour indicator to eliminate ...