SMC Pneumatic Compact Cylinder 16mm Bore, 20mm Stroke, CQS Series, Double Acting

  • RS-stocknr. 700-6086
  • Fabrikantnummer CDQSB16-20D
  • Fabrikant SMC
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: JP
Productomschrijving

CQS Cylinders

The CQS Series of Compact Cylinders is available for those small bore cylinder applications. Both switch capable and non-switch capable body styles are the same.

Space and weight saving
Magnetic or non-magnetic pistons available
Proof pressure 15 bar
Internal thread rod ends
Nitrile seals
Clean Lines
Flush fitting auto switch as standard
Variety of switches and a variety of lead wire lengths

CQS 12-25 mm Diameter

Specificaties
Kenmerk Waarde
Stroke 20mm
Bore 16mm
Action Double
Manufacturer Series CQS
Dimensions 40.5 x 29 x 29mm
Length 40.5mm
Width 29mm
Maximum Operating Pressure 1 MPa
Height 29mm
Maximum Operating Temperature +70°C
Minimum Operating Temperature -10°C
Weight 64g
2 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
32,83
(excl. BTW)
39,72
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
32,83 €
5 +
31,83 €
Related Products
Magnetic piston as standard across rangeStainless steel piston ...
Description:
Magnetic piston as standard across rangeStainless steel piston rodAnodised aluminium alloy barrel and end capsPolyurethane nitrile rubber sealsVery compact - approximately one third the length of a corresponding ISO modelSpring return on single-acting modelsTemperature range -5°C to +80°C (consult our ...
Single and double-acting compact short-stroke cylinders, operating with ...
Description:
Single and double-acting compact short-stroke cylinders, operating with lubricated or non-lubricated filtered compressed air. CO5 series cylinders are easy to install in confined spaces, easy to clean, and offer good corrosion resistance. The cylinders are supplied pre-lubricated (for applications where ...
Compact single and double acting cylinders, considerably shorter ...
Description:
Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs. Space and weight savingMagnetic pistonProof pressure 15barOperating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar maxSupplied with tapered and parallel ports.
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication ...
Description:
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication not requiredMale-threaded rod endIP67 ratedProof pressure 1.05 barOperating pressure 1.2 bar, 6mm dia and 0.6 bar, 10mm/16mm dia (min) 7 bar (max)Ambient and fluid temperature -10ºC to +60°CStroke tolerance +1.0mm, -0mmRubber bumper ...