Festo Pneumatic Cylinder 50mm Bore, 10mm Stroke, ADVC Series, Double Acting

  • RS-stocknr. 136-6604
  • Fabrikantnummer ADVC-50-10-I-P-A
  • Fabrikant Festo
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

ADVC Series Double Acting Cylinders

FESTO ADVC series of compact short stroke pneumatic cylinder are up to 60% smaller than standard pneumatic cylinders. Providing maximum productivity in confined spaces. These double acting pneumatic actuators have dual connection ports for compressed air to be applied for advancing and retracting the piston rod. The extensive range of stroke length and bore size variants in the ADVC series are the ideal choice for clamping or applications where installation space is limited.

Pneumatic Cylinder Operation
The ADVC series is a double acting actuator with air applied to extend and to retract the piston in a linear motion to the desired stroke length. Magnetic piston rods allow contactless position detection via a proximity sensor mounted in slots along the cylinder body.


Cylinders are fitted with flexible polymer end cushioning helping to reduce noise and vibration, prolong service life and increase production and productivity.

Features and Benefits

Double acting cylinders with piston rod
Slots for flush mounting proximity sensors
Low friction design allowing for continuous operation
Versatile mounting hole pattern to VDMA 24562
Cushioning requires no adjustment saving maintenance time and cost

How do I mount the pneumatic cylinder?

The ADVC series pneumatic actuators can be mount horizontally or vertically to suit the required application. Optional mounting accessories provide further flexibility allowing the cylinder to be attached with a swivel bracket for free movement, foot mounted for support under high loads or combined with other actuators to give a wider range of movement.

FESTO Short Stroke Cylinders

Specificaties
Kenmerk Waarde
Stroke 10mm
Bore 50mm
Action Double
Manufacturer Series ADVC
Pneumatic Connection G 1/8
Piston Rod Thread Gender Female
Dimensions 63.5 x 63.5 x 46mm
Length 46mm
Width 63.5mm
Height 63.5mm
Maximum Operating Pressure 10 bar
Maximum Operating Temperature +80°C
Minimum Operating Temperature -20°C
2 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
92,22
(excl. BTW)
111,59
(incl. BTW)
Aantal stuks
Per stuk
1 +
92,22 €
Related Products
Compact single and double acting cylinders, considerably shorter ...
Description:
Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs. Space and weight savingMagnetic pistonProof pressure 15barOperating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar maxSupplied with tapered and parallel ports.
This dual rod cylinder has a guide function ...
Description:
This dual rod cylinder has a guide function suitable for use within pick and place applications. The dual rod cylinder also has an adjustable stroke range and can be mounted on three faces. Auto switch can be installed from three ...
Compact space saving cylindersDouble acting, Single rodWide range ...
Description:
Compact space saving cylindersDouble acting, Single rodWide range of options availableAuto switch capableProof pressure: 1.5 MPaMaximum operating pressure: 1.0 MPa.
SMC SV Series employ multi-pin connectors in place ...
Description:
SMC SV Series employ multi-pin connectors in place of conventional lead wires within manifold blocks. The design of the connector-type manifold enables any changes within the manifold station to be greatly simplified. Cassette base type manifolds offer the ultimate in ...