Norgren PNEUFIT Series Bulkhead Threaded-to-Tube Adaptor, Push In 6 mm to Push In 6 mm, Threaded-to-Tube Connection
- RS-stocknr.:
- 210-1925
- Fabrikantnummer:
- 100490600 DIS
- Fabrikant:
- Norgren
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
- RS-stocknr.:
- 210-1925
- Fabrikantnummer:
- 100490600 DIS
- Fabrikant:
- Norgren
Wetgeving en conformiteit
- Land van herkomst:
- GB
Productomschrijving
IMI Norgren Pneumatic Fitting, Nickel-Plated Brass, Vacuum to 18 Bar Pressure Range - Pneufit Series - 100490600
Working with a demanding pressurised system? You can put this robust IMI Norgren pneumatic fitting under pressure with confidence. It's a swivel bulkhead adaptor that makes a durable connection between hoses and equipment in your industrial compressed air circuit. An elbow profile makes it an ideal fit for tight corners, so you can install tubing without needing to bend it out of shape. This component stays the course in operating pressures of up to 18 bar. Its threads are pre-coated with a non-PTFE-based sealant, so you're system stays safe from contamination. You can leave your toolbox on your workbench, as this fitting's push-in technology allows for snappy assembly.
Features & Benefits
Wide ambient temperature range between -20°C and +80°C, making it compatible with demanding settings
Corrosion-resistant nickel-plated brass body, for longevity in humid locations
Silicone-free O-ring withstands high pressure with little risk of cracking
Corrosion-resistant nickel-plated brass body, for longevity in humid locations
Silicone-free O-ring withstands high pressure with little risk of cracking
Applications
Robotics systems
Automated assembly lines
Automotive manufacturing
Hoisting equipment
Automated assembly lines
Automotive manufacturing
Hoisting equipment
What size hose is this pneumatic fitting compatible with?
You can use this pneumatic fitting with hoses that have a 6mm outer diameter, so it's widely compatible.
Threaded, Tube-to-Tube & Adaptors
Specificaties
Kenmerk | Waarde |
---|---|
Connector A | Push In 6 mm |
Connector B | Push In 6 mm |
Pneumatic Fitting Type | Bulkhead Threaded-to-Tube Adaptor |
Connection Style | Threaded-to-Tube |
Threaded Connection | M14 x 1 |
Manufacturer Series | PNEUFIT |
Inlet Port | M14 Male |
Number of Inlet Ports | 1 |
Outlet Port | Push In 6 mm |
Number of Outlet Ports | 1 |
Thread Material | Nickel Plated Brass |
Finish | Nickel Plated |
Maximum Operating Temperature | +80°C |
Minimum Operating Temperature | -20°C |
Body Material | Nickel Plated Brass |
Angle | 90° |
Maximum Operating Pressure | 18 bar |
Mounting Hole Diameter | 12mm |
Mounting Type | Inline |