- RS-stocknr.:
- 213-2071
- Fabrikantnummer:
- SYJ 35 TF
- Fabrikant:
- SKF
- RS-stocknr.:
- 213-2071
- Fabrikantnummer:
- SYJ 35 TF
- Fabrikant:
- SKF
Wetgeving en conformiteit
- Land van herkomst:
- IT
Productomschrijving
SKF Pillow Block Bearing, 35mm ID, 46mm Overall Width, 5300r/min Limiting Speed - SYJ 35 TF
Are you on the hunt for a support element that also handles rotational movements? Choose this pillow block bearing from SKF. It's a strong choice as it's got the muscle to support static loads up to 15.3kN. To install the assembly, be guided by the two 129mm-distanced pre-drilled holes in its extended inner ring and bolt it down to your desired surface. Once you're happy with the setup, use a screwdriver to tighten the inner ring via the set screw located on top.
Features & Benefits
Light 1.45kg weight relieves your mounting surface of excess weight
Cast-iron housing withstands mechanical stress and impacts for a long service life
Relubrication hole for easy accessibility during maintenance
Dynamic load rating of 25.5kN for compatibility with heavy axial weights
Limiting speed of 5300r/min is ideal for high-velocity applications
Cast-iron housing withstands mechanical stress and impacts for a long service life
Relubrication hole for easy accessibility during maintenance
Dynamic load rating of 25.5kN for compatibility with heavy axial weights
Limiting speed of 5300r/min is ideal for high-velocity applications
Applications
Paper and pulp mills
Agricultural equipment
Automotive manufacturing
Construction plants
Agricultural equipment
Automotive manufacturing
Construction plants
Is this pillow block bearing sealed?
Yes. It's sealed and has a flinger on both sides of the unit, so it keeps contaminants at arm's length.
Specificaties
Kenmerk | Waarde |
---|---|
Inside Diameter | 35mm |
Bearing Unit Type | Pillow Block Bearing Unit |
Material | Cast Iron |
Centre Height | 47.6mm |
Mount Hole Size | 17 mm |
Length | 167mm |
Overall Height | 93mm |
Mount Hole Centre-to-Centre | 129mm |