- RS-stocknr.:
- 506-684
- Fabrikantnummer:
- TSN511L
- Fabrikant:
- SKF
- RS-stocknr.:
- 506-684
- Fabrikantnummer:
- TSN511L
- Fabrikant:
- SKF
Datasheets
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- SE
Productomschrijving
SKF Double Lip Seal, Type L, Polyurethane Construction - TSN511L
Want to keep your bearing running smoothly with minimum hassle? Use this double-lip seal from SKF to keep contamination firmly locked out. As a Type L seal, it's suitable for use with plummer-block-housed units. For easy compatibility, it measures 255 (L) x 95mm (D) and has an overall height of 128mm, an inside diameter of 50mm and a centre height of 70mm. The 16mm holes for mounting are located 210mm apart (centre to centre), which makes it a precise fit for standard bearings.
Features & Benefits
Additional dust lip makes it suitable for use in dirty and dusty environments
Flexible, oil-resistant PU material is hardwearing to give you a long service life
Suitable for use with shafts rotating at peripheral speeds of up to 13 m/s (2600 ft/min), supporting high-speed applications
Flexible, oil-resistant PU material is hardwearing to give you a long service life
Suitable for use with shafts rotating at peripheral speeds of up to 13 m/s (2600 ft/min), supporting high-speed applications
Applications
Flour mills
Materials handling
Marine equipment
Materials handling
Marine equipment
What's a plummer block?
A plummer block is a pedestal-mounting block that houses a bearing. It holds the outer ring of the bearing still while allowing the inner ring to rotate. When properly installed they can last a long time without needing to be replaced.
Plummer Blocks, Bearing Lubrication and Accessories
Specificaties
Kenmerk | Waarde |
---|---|
Inside Diameter | 50mm |
Outside Diameter | 75.5mm |
Seal Type | Four-Lip Seal |
Thickness | 12.5mm |
Seal Material | TPE |