- RS-stocknr.:
- 189-3335
- Fabrikantnummer:
- 16023 +Cal
- Fabrikant:
- Volkel
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Toegevoegd
Prijs Per stuk
€ 107,11
(excl. BTW)
€ 129,60
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 + | € 107,11 |
- RS-stocknr.:
- 189-3335
- Fabrikantnummer:
- 16023 +Cal
- Fabrikant:
- Volkel
Datasheets
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- DE
Productomschrijving
A thread limit plug gauge is a combination of go plug gauge and no-go plug gauge. The scrap side of the thread plug gauge is marked with a red ring. The go end of the thread plug gauge must screw into the thread cut into a part by hand (without using excessive force). If unable to do so, the thread does not meet the requested standards (=scrap). The scrap side of the thread plug gauge must not be able to be manually turned more than two turns into the cut thread (without using excessive force). If it can be screwed in more, the thread does not meet the requested standards (=scrap). The reference temperature for parts and gauges is 20° Celsius. Calibrated at a measurement laboratory separate from VÖLKEL. Calibrated using IAC thread scanners.
Specificaties
Kenmerk | Waarde |
|---|---|
| Plug/Ring | Plug |
| Gauge Type | Plug Thread Gauge |
| Go / No Go | Go/No Go |
| Thread Size | M10 x 1.5 |
| Pitch Diameter | 1.5mm |
| Tolerance | 6H |
| Single or Double Ended | Double |
| Imperial or Metric | Metric |
| Calibrated | PreCal |