Microchip Technology PL123-02NGI PLL Clock Buffer 6-Pin DFN

  • RS-stocknr. 177-9796
  • Fabrikantnummer PL123-02NGI
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

The PL123-02N is a low-cost general purpose 1-to-2 LVCMOS fan-out buffer. An output enable (OE) pin is available to enable the outputs or disable them into an active low state. When the outputs are disabled, the IC consumes less than 5μA of power. The OE pin incorporates a pull up resistor giving a default condition of logic “1”. The input and outputs are LVCMOS levels and operate up to 200 MHz. Input signals with Spread Spectrum Modulation can also be used. The spread spectrum modulation will not be affected by the PL123-02N as the signal passes through the IC. A space-saving 6-pin DFN package enables designs requiring minimal board area.

Supports 3.3V, 2.5V, and 1.8V power supplies
Frequency Support:
3.3V Supplies: DC – 200 MHz
2.5V Supplies: DC – 150 MHz
1.8V Supplies: DC – 100 MHz
Output Enable (OE) pin
LVCMOS Input/Output
Accepts SST and non SST clock signals
Operating temperature range from -40°C to 85°C
Available in space-saving 6-pin DFN GREEN package

Specificaties
Kenmerk Waarde
Number of Elements per Chip 3
Maximum Supply Current 0.8 mA
Maximum Input Frequency 200MHz
Mounting Type Surface Mount
Package Type DFN
Pin Count 6
Dimensions 1.35 x 2.05 x 0.55mm
Length 1.35mm
Width 2.05mm
Height 0.55mm
Maximum Operating Supply Voltage 4.6 V
Maximum Operating Temperature +85 °C
Minimum Operating Supply Voltage -0.5 V
Minimum Operating Temperature -40 °C
15 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
2,112
(excl. BTW)
2,556
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 5
2,112 €
10,56 €
10 - 20
1,816 €
9,08 €
25 - 95
1,724 €
8,62 €
100 +
1,564 €
7,82 €
*prijsindicatie
Related Products
The SY89853U features two, low jitter 2:1 differential ...
Description:
The SY89853U features two, low jitter 2:1 differential multiplexers with 100K LVPECL (800mV) compatible outputs, capable of handling clocks up to 2.5GHz and data streams up to 2.5Gbps. The SY89853U differential inputs include Micrel's unique, 3-input termination architecture that allows ...
A Direct Digital Synthesizer (DDS) is versatile device ...
Description:
A Direct Digital Synthesizer (DDS) is versatile device are used for the creation of arbitrary analogue waveforms from a fixed-frequency reference clock. They can be used in many application areas such as signal generation, communication systems, function generators and sound ...
The Silicon Labs Si521xx PCI-Express clock generators feature ...
Description:
The Silicon Labs Si521xx PCI-Express clock generators feature low-power push-pull output buffer technology reducing the external terminating resistors and enabling smaller packaging.To increase performance they support programmable drive strength, rise/fall times, output impedance and down spread spectrum clock ...
The NB4N507A is a precision clock synthesizer which ...
Description:
The NB4N507A is a precision clock synthesizer which generates a very low jitter differential PECL output clock. It produces a clock output based on an integer multiple of an input reference frequency. The NB4N507A accepts a standard fundamental mode crystal, ...