Wago PLC Power Supply 750 Series I/O Module, 24 V dc 64 x 12 x 100 mm

  • RS-stocknr. 868-7377
  • Fabrikantnummer 750-610
  • Fabrikant Wago
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Supply Module with Fuse Diagnostics

The supply module provides field side power through the power jumper contacts. The maximum available supply current to all connected modules is 6.3A. Should higher currents be necessary, intermediate supply modules must be added in the assembly.
The module sends information about the status of the supply module to the fieldbus coupler through two input bits.

LEDs indicate blown fuse and status of supply voltage
CAGE CLAMP® connection
24V dc power supply

Wago I/O system range

Remote I/O modular system for all functions.
Makes it easier to connect all I/Os thanks to its Cage clamp system®
Communication with PC, PLCs thanks to the various communication protocols.
Colour codes according to type of signal.
Do not forget to order the end module (508-3959)

Specificaties
Kenmerk Waarde
Manufacturer Series 750
For Use With I/O Module
Line Voltage 24 V dc
Length 64mm
Width 12mm
Depth 100mm
Minimum Operating Temperature 0°C
Maximum Operating Temperature +60°C
Dimensions 64 x 12 x 100 mm
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
21 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
34,75
(excl. BTW)
42,05
(incl. BTW)
Aantal stuks
Per stuk
1 +
34,75 €
Related Products
Logo CMK2000 Communication Module to Integrate the Logo ...
Description:
Logo CMK2000 Communication Module to Integrate the Logo 8 in the Building Bus KNX Power Supply DC 24V 0,04A 1 RJ45 Port for Ethernet Connection 50 Communication Objects Time Synchronization Config./DIAG.PER Web-Interface.
The Easy MFD Logic modules offer the user ...
Description:
The Easy MFD Logic modules offer the user both simplicity and power. The expandable basic MFD-Titan enable central and decentralised I/O expansions to be implemented. They can be combined with the display/operating unit MFD-80 and I/O module which can be ...
NX series IO-Link master unit form Omron. The ...
Description:
NX series IO-Link master unit form Omron. The IO-Link makes communication down to sensor level information visible and the screwless clamping terminal block reduces wiring work. Machine downtime can be reduced Abnormality detection for shortest recovery Condition monitoring for predictive ...
132 with screw/spring terminal digital I/O244 with HE10 ...
Description:
132 with screw/spring terminal digital I/O244 with HE10 type connector digital I/O48 analogue I/O (24 input/24 output channels). 3 Communication base modules each with 20 I/O Expandable using 8 to 32 channel I/O modules (up to 264 channels)Wide range of ...