PR Electronics PLC Power Supply 9400 Series, 21.6 → 26.4 V dc, 25.9V dc, 4 A 96W 109 x 23.5 x 104 mm

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DK
Productomschrijving

9410 Series - Power Control Unit

The 9410 power control unit detects errors from any of the devices mounted on the power rail and transmits a collective alarm to the control system via the internal status relay.
Redundant supply for the power rail can be obtained by mounting two 9410 devices connected to 2 separate power supplies (e.g. PR 9420).

Distributes supply voltage to the power rail
Optional connection of backup supply
Approved for installation in I.S. / Ex zone 2 / Div. 2
Optional redundant supply for the power rail
Must be installed on power rail, PR type 9400 (e.g. stock-no. 827-5381)

Switch Mode - PR Electronics

Specificaties
Kenmerk Waarde
Manufacturer Series 9400
Line Voltage 21.6 → 26.4 V dc
User Power Output Voltage 25.9V dc
Output Current 4 A
Output Power 96W
Length 109mm
Width 23.5mm
Depth 104mm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Dimensions 109 x 23.5 x 104 mm
4 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
155,35
(excl. BTW)
187,97
(incl. BTW)
Aantal stuks
Per stuk
1 +
155,35 €
Related Products
The Millenium 3 is the latest generation in ...
Description:
The Millenium 3 is the latest generation in the Millenium series. Improvements over the Millenium 2 Plus include:. Power supplies with breakers, regulated and protected against overload and short-circuits and easily integrated into boards and cabinets.The output voltage potentiometer adjusts ...
The CJ1M is a powerful and compact PLC ...
Description:
The CJ1M is a powerful and compact PLC family, covering applications requiring up to 640 I/O. CPU models are available with built in pulse outputs for stepper or servo control, and all CPUs in the CJ1M family enjoy optional modules ...
AS-I is a method of providing communication from ...
Description:
AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.A unique feature of the AS-I system ...
A Lithium battery for protecting program memory against ...
Description:
A Lithium battery for protecting program memory against data loss in the event of a power failure. Suitable for use with SLC-500 processors, hand-held programming terminals and CompactLogix L-20 processors.