Mitsubishi Battery F2-40BL Series FX2N Series

  • RS-stocknr. 624-1825
  • Fabrikantnummer F2-40BL
  • Fabrikant Mitsubishi
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: JP
Productomschrijving

Replacement Batteries

These replacement batteries for the FX2N PLC range are available both with and without connectors.

Additional Modules for Mitsubishi FX1S, FX1N & FX2N PLC's

Products in this range are for use with FX1S, FX1N and FX2N PLC, unless specified otherwise. All are DIN rail mount and are 90mm high and 87mm deep. The width varies and is tabled below.

All of the following products, except the Extension Cable, attach directly to the right hand end of the previous unit, block or module using the short integral lead.

Specificaties
Kenmerk Waarde
Manufacturer Series F2-40BL
For Use With FX2N Series
79 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
177 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
67,60
(excl. BTW)
81,80
(incl. BTW)
Aantal stuks
Per stuk
1 +
67,60 €
Related Products
The Millenium 3 is the latest generation in ...
Description:
The Millenium 3 is the latest generation in the Millenium series. Improvements over the Millenium 2 Plus include:. Power supplies with breakers, regulated and protected against overload and short-circuits and easily integrated into boards and cabinets.The output voltage potentiometer adjusts ...
AS-I is a method of providing communication from ...
Description:
AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.A unique feature of the AS-I system ...
A Lithium battery for protecting program memory against ...
Description:
A Lithium battery for protecting program memory against data loss in the event of a power failure. Suitable for use with SLC-500 processors, hand-held programming terminals and CompactLogix L-20 processors.
Used to power CompactLogix controller and I/O modulesMay ...
Description:
Used to power CompactLogix controller and I/O modulesMay also power additional I/O banks in MicroLogix 1500 (series A, revision C and FRN 3 or higher) systemsEach CompactLogix I/O bank requires a power supplyUp to 8 modules may be fitted each ...