- RS-stocknr.:
- 750-8633
- Fabrikantnummer:
- 2080-IF4
- Fabrikant:
- Allen Bradley
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 14/05/2024, met een levertijd van 1 werkdag.
Toegevoegd
Prijs Per stuk
€ 164,63
(excl. BTW)
€ 199,20
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 164,63 |
- RS-stocknr.:
- 750-8633
- Fabrikantnummer:
- 2080-IF4
- Fabrikant:
- Allen Bradley
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- SG
Productomschrijving
Analogue I/O Modules
Voltage or Current inputs
Dimensions: H 90 x W 40 x D 87mm
Dimensions: H 90 x W 40 x D 87mm
Note
Installations subject to high vibration should be panel mounted (as opposed to DIN rail mounted). A 50mm space should be left on all sides around units to provide adequate ventilation.
Allen Bradley I/O Module For Use With Micro 830 Series, 0V to 10V - 2080-IF4
Choose this input module from Rockwell Automation's Allen Bradley range to receive signals from switches or sensors and send them to a central processor. It enhances system efficiency and improves safety levels while reducing logistical challenges associated with complex data transfer systems. Plug-in technology lets you easily fit it to a terminal block for simple and speedy mounting. This device is compatible with PLCs (programmable logic controllers) from Rockwell Automation's Micro 830 series.
Features and Benefits
• Broad operating temperature range of -20°C to +65°C for use in demanding environments
• Accepts both voltage and current inputs for enhanced versatility in use
• Compact dimensions of 90 (H) x 40 (W) x 87mm (D)
• Accepts both voltage and current inputs for enhanced versatility in use
• Compact dimensions of 90 (H) x 40 (W) x 87mm (D)
Standards and Certifications
• UL (Underwriters' Laboratories)
• CE (Conformitè Europëenne)
• C-Tick (Australian Communications Media Authority)
• CE (Conformitè Europëenne)
• C-Tick (Australian Communications Media Authority)
Is it necessary to wire this module before it's installed?
You can choose to wire this plug-in module before inserting it into the controller or wire it once the module is secured in place.
Which wire sizes are compatible with this I/O module?
You can use solid wires ranging in size from 26 to 16AWG (American Wire Gauge) or stranded wires with a diameter of between 26 and 18AWG.
Specificaties
Kenmerk | Waarde |
---|---|
Accessory Type | PLC I/O Module |
Number of Inputs | 4 |
Input Type | Analogue |
Output Type | Analogue |
Number of Outputs | 4 |
For Use With | Micro 830 Series |
Output Current | 0 → 20 mA |
Maximum Operating Temperature | +65°C |