ABB PLC I/O Module

  • RS-stocknr. 715-8917
  • Fabrikantnummer 2CDG110025R0011
  • Fabrikant ABB
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

ABB KNX DG/S8.1 Dali Gateway

a DIN rail mounted device for insertion in the distribution board on a DIN rail
used to control DALI devices e.g. electronic ballasts, transformers, relays etc. via the KNX
Up to 128 DALI devices (max. 16 per output) can be connected to 8 independent DALI outputs (channels)
Each output can also be switched in sequence without a KNX connection using the test button
The following functions can be implemented: Per channel: switching, dimming, value setting, slave mode, lamp burning, status value, electronic ballast and lamp failure
Management of up to 16 lightscenes
The DALI power supply is integrated in the gateway

ABB KNX

1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
488,81
(excl. BTW)
591,46
(incl. BTW)
Aantal stuks
Per stuk
1 +
488,81 €
Related Products
ABB R600 series interface relays are used for ...
Description:
ABB R600 series interface relays are used for electrical isolation, amplification and signal matching between a PLC, PC or field bus system and the sensor/actuator level. The compact design and different connection terminal possibilities optimise your panel installation. Screw or ...
Barth PG-65 Parameter Programmer has been designed for ...
Description:
Barth PG-65 Parameter Programmer has been designed for wireless communication with the Mini-PLC STG-8xx series using IrDA or CAN interface to upload and download user-defined parameters.The STG-8xx CAN and IrDA interfaces are Open Source programmable using the powerful KEIL μVision ...
AS-I is a method of providing communication from ...
Description:
AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.A unique feature of the AS-I system ...
A variety of Plug-in modules that can be ...
Description:
A variety of Plug-in modules that can be used with DIRIS A40 series energy meters. The plug-in modules allow flexible customisation with a range of options depending on the model. • Pulse outputs (405-6170)• RS485 MODBUS communication (405-6192)• Analogue outputs ...