Pepperl + Fuchs PLC I/O Module 4 Inputs, 3 Outputs 21 → 31 V dc, 102 x 22.5 x 99 mm

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: SG
Productomschrijving

AS-I Actuator/Sensor DIN Rail Modules

22.5mm width housing
Removable terminals
Available with a variety of inputs/outputs

//media.rs-online.com/t_line/L316042-01.gif

Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.
A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).
By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.
The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.
Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring
High data speed
Low cost installation
Intelligent diagnostics
Easy to learn and install
Highly flexible
Can connect to other fieldbus systems
User-friendly
Off-site pre-assembly and test
Easy maintenance
Faster on-site commissioning
Host or stand alone use
Able to use standard sensors and actuators (using modules)

Specificaties
Kenmerk Waarde
Number of Inputs 4
Number of Outputs 3
Number of I/O 7
Voltage Category 21 → 31 V dc
Length 102mm
Width 22.5mm
Depth 99mm
Dimensions 102 x 22.5 x 99 mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +60°C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 10/11/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
153,62
(excl. BTW)
185,88
(incl. BTW)
Aantal stuks
Per stuk
1 +
153,62 €
Related Products
SCALANCE X-300 managed plusFor setting up electrical and ...
Description:
SCALANCE X-300 managed plusFor setting up electrical and optical industrial Ethernet linear, star or ring structuresRedundant voltage feedDevice diagnosis on device using LEDAlarm contact for simple indication of disruptions.
I/O expansion module for use with a nanoLine ...
Description:
I/O expansion module for use with a nanoLine base unit (e.g. RS stock no.: 575-018)Galvanically separatedScrew connectionTop-hat rail mountingSupply voltage 24 Vdc (via base unit)Typical supply current 50 mA, max. 90 mATypical response time AN 60 μsOutput current max. each ...
Unmanaged Industrial Media ConverterDesign of Ethernet networks with ...
Description:
Unmanaged Industrial Media ConverterDesign of Ethernet networks with 10/100Mbit/sLine, star and ring structureRange up to 26,000 mX101-1: Multimode InterfaceX101-1LD: Single-mode interfaceSubscriber or network connections electrical or optical depending on the device port characteristicsRedundant voltage ...
Specially designed to meet the requirements of industrial ...
Description:
Specially designed to meet the requirements of industrial telemaintenance.Manages sending of SMS, fax or e-mail.Accessible everywhere in the world through networks switched to the V.34 standard.Numerous security functions; password protection, call-back function.Supply voltage 24 VDC.For installation on DIN rail.