Schneider Electric Twido Series PLC I/O Module 12 Inputs, 2 (Solid State), 6 (Relay) Outputs 24 V dc, 55 x 70 x 90 mm

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Optimised Terminal Block (OTB) Interface Modules

3 Communication base modules each with 20 I/O
Expandable using 8 to 32 channel I/O modules (up to 264 channels)
Wide range of digital and analogue I/O's that are common to the Twido Logic Controllers
Direct mounting on DIN rail
Connectivity to fieldbus: CANopen, Modbus and Ethernet
IP20 rated
Removable screw terminal
Dimensions: H90mm x W55mm x D70mm
Maximum no. of I/O:
Power supply (non-isolated): 24Vdc

132 with screw/spring terminal digital I/O
244 with HE10 type connector digital I/O
48 analogue I/O (24 input/24 output channels)

Note

To connect OTB1C0DM9LP (stock no. 612-0201 ) to a CAN network use connector TSXCANKCDF90T (stock no. 612-0425)

OTB Modbus interface module

Schneider Electric Advantys

The Advantys range of distributed I/O and interface products from Schneider Electric eliminate traditional wiring methods and reduce associated time and costs by placing I/O connection interfaces in close proximity to sensors and actuators within an application.The Advantys OTB distributed I/O solution consists of a compact system (network interface and integrated I/O) with the addition of Twido I/O expansion modules.,To simplify sensor and actuator connections as well as linking commons, the Advantys OTB offer includes a commoning module (stock no. 612-0223). This module allows the through connection of the internal bus or network and enables connection of the commons in two isolated groups.,Configuration of I/O is made using respective controller software but to aid with this a separate configuration tool is available for the Twido controller.,Each base incorporates 20 I/O:

A network interface module (including CANopen) with 12 inputs x 24V, 6 relay outputs and 2 solid state outputs x 24V-0.3 A
As an extension, up to 7 discrete or analogue I/O expansion modules can be added.

Specificaties
Kenmerk Waarde
Manufacturer Series Twido Series
Number of Inputs 12
Number of Outputs 2 (Solid State), 6 (Relay)
Input Type Analogue
Output Type Analogue, Relay
For Use With Twido Series
Number of I/O 20
Voltage Category 24 V dc
Length 55mm
Width 70mm
Depth 90mm
Dimensions 55 x 70 x 90 mm
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
273,90
(excl. BTW)
331,42
(incl. BTW)
Aantal stuks
Per stuk
1 +
273,90 €
Related Products
The BMX AMI 0410 module is a high-level ...
Description:
The BMX AMI 0410 module is a high-level analogue input module with 4 isolated inputs (16 bits). Used with sensors or transmitters, it performs monitoring, measurement and process control functions for continuous processes.The module operates with voltage inputs. It includes ...
BMX discrete I/O modules are standard format (1 ...
Description:
BMX discrete I/O modules are standard format (1 slot). They have a case, which ensures IP20 protection of the electronics, and are locked into postion by a captive screw. Data rate: 20kb/s to 1Mb/s (bus length dependent)Internal RAM capacity: 4Mb ...
These modules convert digital PLC values into 2 ...
Description:
These modules convert digital PLC values into 2 independent channels of analogue voltage or current outputs. 16 bit resolutionFast conversion rate improves controlBuilt-in EEPROM for storing set-up dataOnly occupies 16 PLC I/O points, great for compact systemsOutput short circuit protection ...
The BMX AMM 0600 module is a high-level ...
Description:
The BMX AMM 0600 module is a high-level analogue input/output module with 4 non-isolated voltage or current inputs and 2 non-isolated voltage (±10V) and current outputs. The module offers:. Protection of the module against overvoltagesConversion of digital signals (11 bits ...