Siemens SIMATIC S7-200 Series PLC I/O Module 24 V dc

  • RS-stocknr. 434-1866
  • Fabrikantnummer 6ES7277-0AA22-0XA0
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving

EM277 Profibus DP Slave

Used to interface between a S7-22X CPU and a Profibus DP network
Can be simultaneously operated as MPI and DP slave
MPI protocol enables simultaneous data exchange with MPI masters
Allows an S7-200 CPU to be connected to a Profibus DP or MPI network as a slave, at various band rates up to 12 Mbaud. With the exception of the module address, which is set with 2 rotary switches, all other settings are in the DP master
In MPI mode, can be used to connect operator panels such as TD200 or TDO70
Maximum number of nodes - 31

Warning

  • This product is in obsolescence mode and is due for discontinuation by the manufacturer. We recommend that you review the alternative highlighted by the manufacturer. Alternatively, refer to the cross reference list in the Technical Reference section which highlights the upgrade path for your current generation of products.
Specificaties
Kenmerk Waarde
Manufacturer Series SIMATIC S7-200 Series
For Use With S7-200 Series
Voltage Category 24 V dc
Module Type Slave Module
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
403,57
(excl. BTW)
488,32
(incl. BTW)
Aantal stuks
Per stuk
1 +
403,57 €
Related Products
Expansion modules and accessories to support the Siemens ...
Description:
Expansion modules and accessories to support the Siemens S7-300 PLC range. Each S7-313 PLC CPU Base Unit may be expanded with up to 8 expansion modules. S7-314 CPU Base Units can accept a total of 4 expansion racks consisting of ...
Expansion modules with digital output. Suitable for ac/dc ...
Description:
Expansion modules with digital output. Suitable for ac/dc solenoid valves, contactors, motor starters, fractional h.p. motors and indicator lights.
Expansion modules and accessories to support the Siemens ...
Description:
Expansion modules and accessories to support the Siemens S7-300 PLC range. Each S7-313 PLC CPU Base Unit may be expanded with up to 8 expansion modules. S7-314 CPU Base Units can accept a total of 4 expansion racks consisting of ...
Digital input and outputs for the ET 200SConnect ...
Description:
Digital input and outputs for the ET 200SConnect to terminal modules TM-E with automatic encryptionHigh-spec version for increased system availability, additional functionality and extensive diagnosticsModule exchange during operation subject to voltage (hot swapping).