Kunbus Revolution Pi, 24 V, 2 kHz, Polycarbonate, IP20

  • RS-stocknr. 181-1144
  • Fabrikantnummer PR100195
  • Fabrikant Kunbus
Wetgeving en conformiteit
Land van herkomst: DE

Revolution Pi DI - Powered by Raspberry Pi

The RevPi DI, like its counterparts, the DO/DIO, features a 28 pin connector on the front side of the module (2 rows of 14 male pins) and comes with female connectors with spring clip contacts up to 1.5mm². The DI has 16 digital outputs.

Features and benefits

• Galvanic separation between the PiBridge logic circuit (uses its own power supply) protects against reverse polarity, over voltages and transient voltage or current interference adhering to the requirements of EN61131-2.
• PiBridge cyclically exchanges with the RevPi Core's central processing image using the PiControl driver. As per these exchanges occurring, any possible error conditions and configuration data is also cyclically transmitted.
• DC inputs have a voltage threshold of 24 V supply voltage which is compliant with EN61131-2 type 1 & 3 as input definitions. Your input current will be capped at a maximum of 2.4mA.
• Adjustable low-pass filtering that helps prevent input signal bouncing. The filter applies to all inputs or none. All the inputs are protected against any ESD interference, including bursts and surges compliant to EN61131-2.
• SPI data exchange monitoring is enabled on the DO. Safe states are run if no SPI traffic is detected and also if output power supply drops too low or the output circuit reached an over-temperature.
• DIN rail mountable (to EN 50022) & compact in size making it perfect to mount several where space restrictions may apply.
• Polycarbonate housing material prescribed to standard EN 61131-3 (resistance to vibration/shock/damp air/high&low temperatures)
• IP20 rated (effective sealing resistant to foreign bodies such as dirt/dust)
• Outputs not only come through digital signal but also a pulse-width modulated PWM signal


• Automotive sector
• Energy sector
• Lighting sector
• Home automation

With this digital input module, the RevPi Core can be extended by 16 digital inputs, thus creating the prerequisite for a small industrial controller. The expansion module is connected to the RevPi core via the top connector. The connector is included in the scope of delivery of this expansion module.

Kenmerk Waarde
Manufacturer Series Revolution Pi DI
Number of Inputs 16
Input Type Digital
For Use With Revolution Pi Connect, Revolution Pi Core
Number of I/O 16
Module Type Digital Input
Length 96mm
Width 22.5mm
Depth 110.5mm
Dimensions 96 x 22.5 x 110.5 mm
Mounting Type DIN Rail
Input Current 2.4mA
Minimum Operating Temperature -40°C
Maximum Operating Temperature +55°C
Supply Voltage 12 - 24 V dc
15 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
135,30 €
Related Products
The BMX AMO 0210 module is a module ...
The BMX AMO 0210 module is a module with 2 high-level isolated outputs (15 bits + sign). It offers, for each of them, the ranges:. Voltage: ±10VCurrent: 0 to 20mA and 4 to 20mAThe range is selected during configuration.
CJ1 Digital I/O, Analogue I/O, and Communication modules ...
CJ1 Digital I/O, Analogue I/O, and Communication modules clip together to the right of the CPU in any combination up to a maximum of 10 modules. A further 10 modules can be connected to a CJ1M-CPU13 or CJ1M-CPU23 based system ...
Digital input and outputs for the ET 200SConnect ...
Digital input and outputs for the ET 200SConnect to terminal modules TM-E with automatic encryptionHigh-spec version for increased system availability, additional functionality and extensive diagnosticsModule exchange during operation subject to voltage (hot swapping).
The Siemens analogue expansion module with 2 input ...
The Siemens analogue expansion module with 2 input channels is a highly efficient device used with SIMATIC ET 200S PLCs. It receives analogue input of 2Mohms from resistance thermometers. It has various advanced features like diagnostics for a wire break, ...