Schneider Electric Modicon M340 Series PLC I/O Module 4 Inputs, 2 Outputs 0 → 20 mA 24 V dc

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Modicon M340 Analogue Input/Output

The BMX AMM 0600 module is a high-level analogue input/output module with 4 non-isolated voltage or current inputs and 2 non-isolated voltage (±10V) and current outputs. The module offers:

Protection of the module against overvoltages
Conversion of digital signals (11 bits or 12 bits depending on the range) to analogue signals
Conversion of application data into data that can be used by the digital/analogue converter
Module monitoring and fault indication to the application: Converter test, range overshoot test, watchdog test

For each input, the BMX AMM 0600 module offers the following ranges:

Voltage ±10V, ±5V, 0 to 10V, 0 to 5V and 1 to 5V
Current 0...20mA, 4…20mA and ±20mA, depending on the choice made during configuration

Schneider Electric Modicon M340 PLC

Equipped with astounding memory and performances, this featherweight version will inspire your applications with new momentum. Designed to operate in total synergy with other Schneider Electric devices, Modicon M340 a building block towards your total solution.

Performance

Data rate: 20kb/s to 1Mb/s (bus length dependent)
Internal RAM capacity: 4Mb (3584kb of program memory); 256kb of data memory

Compact design

3 communication ports integrated in the processor
Mounting in low depth cabinet (<150mm)
High-density discrete I/O modules with 64 channels in a 32mm wide format

Communicative, with its integrated ports

CANopen machine and installation bus
Ethernet TCP/IP network - Transparent Ready
Modbus serial link or character mode
Remote access via STN, GSM, Radio or ADSL

Expert

Counter modules with ready-to-use functions
Function block library dedicated to motion control. MF(Motion Function Blocks) to the PLCopen standard
Advanced library of process control blocks oriented towards control of machinery

Innovative and Ruggedness

USB port as standard
Embedded webserver
Recipe file management via FTP protocol
“Plug and Load” SD memory card
No batteries
Rack architecture enabling hot swapping of modules during operation (Hot-Swap)
Exceeds the standards in terms of shocks, vibrations, temperature, altitude and withstand to electrical interference.

Ruggedness

Specificaties
Kenmerk Waarde
Manufacturer Series Modicon M340 Series
Number of Inputs 4
Number of Outputs 2
Input Type Analogue
Output Type Analogue
For Use With Modicon M340
Number of I/O 6
Voltage Category 24 V dc
Output Current 0 → 20 mA
Module Type Mixed Analogue I/O Module
Length 307.6mm
Width 100mm
Depth 140mm
Dimensions 307.6 x 100 x 140 mm
Minimum Operating Temperature 0°C
Maximum Operating Temperature +60°C
7 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
332,90
(excl. BTW)
402,81
(incl. BTW)
Aantal stuks
Per stuk
1 +
332,90 €
Related Products
These modules convert digital PLC values into 2 ...
Description:
These modules convert digital PLC values into 2 independent channels of analogue voltage or current outputs. 16 bit resolutionFast conversion rate improves controlBuilt-in EEPROM for storing set-up dataOnly occupies 16 PLC I/O points, great for compact systemsOutput short circuit protection ...
The 170ADM35010 is a high performing discrete 16 ...
Description:
The 170ADM35010 is a high performing discrete 16 input/ 16 output base module for use with the Modicon Momentum automation platform. It controls discrete field actuating devices by interpreting information from field sensing devices. The module features an internal interface ...
Analogue I/O modules with 4 channels, 12 bit ...
Description:
Analogue I/O modules with 4 channels, 12 bit resolution and direct addressing. Suitable for connection to FX3U PLC's only. 4AD module with 4 channels suitable for 0-10V and 4-20mA analogue inputs 4DA module with 4 channels suitable for 0-10V and ...
Digital input and outputs for the ET 200SConnect ...
Description:
Digital input and outputs for the ET 200SConnect to terminal modules TM-E with automatic encryptionHigh-spec version for increased system availability, additional functionality and extensive diagnosticsModule exchange during operation subject to voltage (hot swapping).