Schneider Electric M340 PLC I/O Module 4 Inputs, 24 V dc

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Modicon M340 Analogue Input Module

The BMX AMI 0410 module is a high-level analogue input module with 4 isolated inputs (16 bits). Used with sensors or transmitters, it performs monitoring, measurement and process control functions for continuous processes.The module operates with voltage inputs. It includes four reading resistors connected to the terminal block to form the current inputs

For each input, the BMX AMI 0410 module offers the following ranges:

Voltage ±10V, ±5V, 0 to 10V, 0 to 5V and 1 to 5V
Current 0...20mA, 4…20mA and ±20mA, depending on the choice made during configuration

Schneider Electric Modicon M340 PLC

Equipped with astounding memory and performances, this featherweight version will inspire your applications with new momentum. Designed to operate in total synergy with other Schneider Electric devices, Modicon M340 a building block towards your total solution.

Performance

Data rate: 20kb/s to 1Mb/s (bus length dependent)
Internal RAM capacity: 4Mb (3584kb of program memory); 256kb of data memory

Compact design

3 communication ports integrated in the processor
Mounting in low depth cabinet (<150mm)
High-density discrete I/O modules with 64 channels in a 32mm wide format

Communicative, with its integrated ports

CANopen machine and installation bus
Ethernet TCP/IP network - Transparent Ready
Modbus serial link or character mode
Remote access via STN, GSM, Radio or ADSL

Expert

Counter modules with ready-to-use functions
Function block library dedicated to motion control. MF(Motion Function Blocks) to the PLCopen standard
Advanced library of process control blocks oriented towards control of machinery

Innovative and Ruggedness

USB port as standard
Embedded webserver
Recipe file management via FTP protocol
“Plug and Load” SD memory card
No batteries
Rack architecture enabling hot swapping of modules during operation (Hot-Swap)
Exceeds the standards in terms of shocks, vibrations, temperature, altitude and withstand to electrical interference.

Ruggedness

Specificaties
Kenmerk Waarde
Manufacturer Series M340
Number of Inputs 4
Input Type Analogue
For Use With M340 Series
Number of I/O 4
Voltage Category 24 V dc
10 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
364,11
(excl. BTW)
440,57
(incl. BTW)
Aantal stuks
Per stuk
1 +
364,11 €
Related Products
BMX discrete I/O modules are standard format (1 ...
Description:
BMX discrete I/O modules are standard format (1 slot). They have a case, which ensures IP20 protection of the electronics, and are locked into postion by a captive screw. Data rate: 20kb/s to 1Mb/s (bus length dependent)Internal RAM capacity: 4Mb ...
These modules convert digital PLC values into 2 ...
Description:
These modules convert digital PLC values into 2 independent channels of analogue voltage or current outputs. 16 bit resolutionFast conversion rate improves controlBuilt-in EEPROM for storing set-up dataOnly occupies 16 PLC I/O points, great for compact systemsOutput short circuit protection ...
Expansion modules and accessories to support the Siemens ...
Description:
Expansion modules and accessories to support the Siemens S7-300 PLC range. Each S7-313 PLC CPU Base Unit may be expanded with up to 8 expansion modules. S7-314 CPU Base Units can accept a total of 4 expansion racks consisting of ...
CJ1 Digital I/O, Analogue I/O, and Communication modules ...
Description:
CJ1 Digital I/O, Analogue I/O, and Communication modules clip together to the right of the CPU in any combination up to a maximum of 10 modules. A further 10 modules can be connected to a CJ1M-CPU13 or CJ1M-CPU23 based system ...