Omron PLC Expansion Module Input Terminal 16 Input, 24 V dc 115 x 53.1 x 49.7 mm

  • RS-stocknr. 746-3085
  • Fabrikantnummer DRT2-ID16-1
  • Fabrikant Omron
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Transistor Remote I/O Terminals

Allows I/O expansion with transistor terminals
Wide variety of data, such as maintenance system data, can be collected without affecting the productivity of the control system
Valuable information can be collected and managed through the network, including information on the communications power supply voltage levels, unit wear and tear, and equipment operating information
Expansion via Expansion I/O Units
With no communications baud rate settings required and detachable terminal blocks, maintenance is easier

Omron DRT2 Temperature Input Terminals

Specificaties
Kenmerk Waarde
For Use With DRT2 Series
Module Type Input Terminal
Input Type PNP
Number of Inputs 16
Voltage Category 24 V dc
Length 115mm
Width 53.1mm
Depth 49.7mm
Dimensions 115 x 53.1 x 49.7 mm
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
403,30
(excl. BTW)
487,99
(incl. BTW)
Aantal stuks
Per stuk
1 +
403,30 €
Related Products
Serial Communication Modules supporting Host Link, No-protocol, NT ...
Description:
Serial Communication Modules supporting Host Link, No-protocol, NT Link (1:N), Serial PLC Link, Serial Gateway (CompoWay/F master, Modbus-RTU master) and Modbus-RTU easy master functions. CP1W-CIF01 RS-232C module (stock no. 401-484) and CP1W-CIF11 RS-422A/485 (401-478) may be used with either CP1L ...
EA-IF-U1 USB INTERFACE. Can be retrofitted, simple to ...
Description:
EA-IF-U1 USB INTERFACE. Can be retrofitted, simple to install using plug and playSimple configuration via setup menu on the deviceGateway function with 2 cards (PSI 9000)Simple networking of different devicesMaster-slave mode supportShare-bus mode supportGalvanic isolation up to 2000 V.
For connecting conventional sensors for the acquisition of ...
Description:
For connecting conventional sensors for the acquisition of current and voltage signals2 inputs, 0-20 mA, 4-20 mA, 20 mA, 0-10 V, 10 V, 2-wire connection methodHigh accuracy of measurementExtremely rapid acquisition of measurement valuesExcellent noise suppression and common mode rejectionMeasurement ...
Reduces wiring while providing I/O flexibility. Terminal block ...
Description:
Reduces wiring while providing I/O flexibility. Terminal block incorporates finger-touch protection from electric shock, conforming to VDE 0106Connects to PLCs and SBCs easily with a connectorMounts on DIN rail trackSPDT (Form C) switching provided when G2R output relays are installedG70A ...