Omron PLC Expansion Module DeviceNet Communications 5 V 130 x 35 x 113.8 mm

  • RS-stocknr. 746-3029
  • Fabrikantnummer CS1W-DRM21-V1
  • Fabrikant Omron
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

CS1 Communication Modules

CS1 communication modules covering DeviceNet, EtherNet/IP and EtherNet for the CS1 series of PLC (Programmable Logic Controller) modules.

Omron CS1

Specificaties
Kenmerk Waarde
For Use With CS1 Series
Module Type DeviceNet Communications
Voltage Category 5 V
Length 130mm
Width 35mm
Depth 113mm
Dimensions 130 x 35 x 113.8 mm
Op voorraad - levertijd 3 à 4 werkdagen.
Prijs Each
912,00
(excl. BTW)
1.103,52
(incl. BTW)
Aantal stuks
Per stuk
1 +
912,00 €
Related Products
Serial Communication Modules supporting Host Link, No-protocol, NT ...
Description:
Serial Communication Modules supporting Host Link, No-protocol, NT Link (1:N), Serial PLC Link, Serial Gateway (CompoWay/F master, Modbus-RTU master) and Modbus-RTU easy master functions. CP1W-CIF01 RS-232C module (stock no. 401-484) and CP1W-CIF11 RS-422A/485 (401-478) may be used with either CP1L ...
The DIRIS A20 is a multi-function meter for ...
Description:
The DIRIS A20 is a multi-function meter for measuring electrical values in all low voltage networks. All the parameters can be configured and displayed on its front panel and measuring and timing functions used.In addition DIRIS A20 has a function ...
Allows I/O expansion with transistor terminalsWide variety of ...
Description:
Allows I/O expansion with transistor terminalsWide variety of data, such as maintenance system data, can be collected without affecting the productivity of the control systemValuable information can be collected and managed through the network, including information on the communications power ...
The FM 351 positioning module is used for ...
Description:
The FM 351 positioning module is used for controlled positioning with rapid traverse/creep speed drives in the S7-300 automation system. The module has 2 independent channels and, thus, controls one rotary axis or one linear axis at a time. The ...