Phoenix Contact Input Terminal PLC Expansion Module - 2 Input, Analogue Input Type

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Inline Analogue Input Terminal Block

For connecting conventional sensors for the acquisition of current and voltage signals
2 inputs, 0-20 mA, 4-20 mA, 20 mA, 0-10 V, 10 V, 2-wire connection method
High accuracy of measurement
Extremely rapid acquisition of measurement values
Excellent noise suppression and common mode rejection
Measurement value acquisition with a resolution of 16 bits

Specificaties
Kenmerk Waarde
Module Type Input Terminal
Input Type Analogue
Number of Inputs 2
Voltage Category 0 → 10 V
Length 136.8mm
Width 12.2mm
Depth 71.5mm
Dimensions 136.8 x 12.2 x 71.5 mm
Series IB IL AI 2/SF-PAC
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
6 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
188,96
(excl. BTW)
228,64
(incl. BTW)
Aantal stuks
Per stuk
1 +
188,96 €
Related Products
Professional range of Ethernet head station from Phoenix ...
Description:
Professional range of Ethernet head station from Phoenix Contact. These modular gateway Ethernet head station with Modbus TCP, HART IP, FDT/DTM can support five expansion modules. All models are highly reliable and excellent quality.
Control or supervise one or several em4 via ...
Description:
Control or supervise one or several em4 via Modbus RS485. Modbus RTU or ASCII RS485 master / slave standard widely used in industryUseful to connect one or several em4 to a programmable touch panel or a SCADAThe removable connector allows ...
The RevPI Gate Sercos III serves to easily ...
Description:
The RevPI Gate Sercos III serves to easily integrate the RevPi core into an existing Sercos III network. The Sercos III Gateway is connected to the RevPi Core base module via the upper system connector. Up to two different gateways ...
Description:
The RevPI Gate Modbus RTU is used to easily integrate the RevPi core into an existing Modbus RTU network. The Modbus RTU Gateway is connected to the RevPi Core base module via the top system connector. Up to two different ...