Mitsubishi PLC Expansion Module Power Supply 8 → 64 Input, 8 → 64 Output 100 → 240 V ac, 24 V dc

  • RS-stocknr. 611-9554
  • Fabrikantnummer FX2N-8EYR-ES/UL
  • Fabrikant Mitsubishi
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: JP
Productomschrijving

Digital Expansion Blocks

These are available in 8 or 16 input or output point sizes. They attach directly to the right hand end of the Base Unit or Expansion Unit (see Digital Expansion Units below) which also provides them with power. Input blocks are opto-isolated, 24Vdc sink or source selectable to suit NPN or PNP sensors, and output blocks are available with relay or transistor outputs. The number of blocks that may be added depends on a number of factors. However, as a guide, with the FX1N, blocks up to 32 I/O can be added. Further expansion (of FX1N and FX2N) is achieved by adding an Expansion Unit (see 2 below), which in turn can be further expanded by adding more Expansion Blocks. With the FX2N, the number of I/O that can be added depends on the size of the Base Unit. For 16 and 32 I/O FX2N base units and 32 I/O Expansion units, up to 32 inputs, or 24 outputs, or (for example) 24 inputs and 8 outputs can be added. For larger Base and Expansion Units, up to 64 inputs, or 48 outputs, or (for example) 32 inputs and 24 outputs can be added. For full configuration details and limitations, please refer to the FX1N and FX2N Hardware Manuals.

Mitsubishi Expansion Module

The Mitsubishi expansion module is designed to be used with the FX3U series. It is available in 8 input and output point sizes. This module can be attached directly to the right-hand end of the base unit or expansion unit, which also provides it with power. Input blocks are opto-isolated or source selectable to suit NPN or PNP sensors and output blocks are available with a relay or transistor outputs.

Features and Benefits

• Available communication protocols are RS-232, RS-422, RS-485, USB
• DIN rail mounting type
• Operating voltage ranges between 100VAC and 240VAC
• These outputs do not require a separate power supply as they are supplied via the basic device bus
• Relay/Transistor output

Applications


Industrial automation
• Robotics
• Automobiles industry

Certifications


UL approved
• cUL approved
•CE

Additional Modules for Mitsubishi FX1S, FX1N & FX2N PLC's

Products in this range are for use with FX1S, FX1N and FX2N PLC, unless specified otherwise. All are DIN rail mount and are 90mm high and 87mm deep. The width varies and is tabled below.

All of the following products, except the Extension Cable, attach directly to the right hand end of the previous unit, block or module using the short integral lead.

Specificaties
Kenmerk Waarde
For Use With FX3U Series
Module Type Power Supply
Output Type Digital, Relay, Transistor
Number of Inputs 8 → 64
Number of Outputs 8 → 64
Voltage Category 24 V dc, 100 → 240 V ac
Memory Available Yes
Length 90mm
Width 350mm
Depth 87mm
Dimensions 90 x 350 x 87 mm
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
17 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
157,95
(excl. BTW)
191,12
(incl. BTW)
Aantal stuks
Per stuk
1 +
157,95 €
Related Products
Block's PowerVision is one of the most technically ...
Description:
Block's PowerVision is one of the most technically advanced and cost-effective power supply systems on the market. All modules are slim, feature communication capacities and boast maximum power reserve for optimum system availability. CompactStabilised and adjustable output voltageUp to 200% ...
For N+1 and 1+1 Redundant Systems Dual Input ...
Description:
For N+1 and 1+1 Redundant Systems Dual Input with Single Output Suitable for all Power Supplies Only 72mV Voltage Drop at 20A Output Current Only 2.15W Loss at 20A and 6.3W at 40A Output Current 160% (65A) Peak Load Capability ...
A range of switch mode power supplies from ...
Description:
A range of switch mode power supplies from Omron with or without indication monitors and simple functions for easy system use.The units are suitable for household appliances and building automation controls which are increasingly required in commercial and residential premises. ...
PSC3 and PSC4 are Class 2 Series of ...
Description:
PSC3 and PSC4 are Class 2 Series of DIN Rail Power Supplies. Output protection: SCP / OVP / OLPHigh efficiency, long life and high reliabilityAll using 105°C long life electrolytic capacitors100 % full load burn-in test.