Steel Pipe Clamp 25mm 14mm 25 → 34mm

  • RS-stocknr. 257-7574
  • Fabrikantnummer SS 2 C
  • Fabrikant Unistrut
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

1-piece Pipe Clamp

Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no. 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section.

For Clamp Width see Dimension B on the line drawing

//media.rs-online.com/t_line/L257756-01.gif
Specificaties
Kenmerk Waarde
For Nominal Diameter 25mm
Length 81mm
Width 32mm
Fixing Hole Diameter 14mm
Material Steel
Weight Per Item 0.09kg
120 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
2,196
(excl. BTW)
2,657
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
2,196 €
10,98 €
*prijsindicatie
Related Products
The Unistrut C Type galvanised beam clamp is ...
Description:
The Unistrut C Type galvanised beam clamp is made from steel. The fit channel size is 21x41mm. The design load is 1000lbsFor use with beam flanges up to 3/4in (19.1mm) thickSafety factor = 2.5 based on the ultimate strength of ...
The Unistrut beam clamps made from steel. Fits ...
Description:
The Unistrut beam clamps made from steel. Fits channel size is 41 x 41mm. Design Load = 500lbs (2.22 kN) eachSafety factor = 2.5 based on ultimate strength of connectionSet screw installation torque: 125 in-lbs (14 N-m)Window Bracket 0.36kg.
The Unistrut beam clamps made from steel. It ...
Description:
The Unistrut beam clamps made from steel. It fits a 41mm channel. Cone point screw included Maximum load 250kgMild steel cone pointed screws as zinc platedSteel loadings apply to mild steel product only.
Girder Bracket for fitting Channel/Strut to Girder Flange. ...
Description:
Girder Bracket for fitting Channel/Strut to Girder Flange.