Omron Through Beam (Emitter and Receiver) Photoelectric Sensor 40 m Detection Range Relay IP64 Block Style E3JK-TR11 2M

  • RS-stocknr. 778-8716
  • Fabrikantnummer E3JK-TR11 2M
  • Fabrikant Omron
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

E3JK Photoelectric Senors with Built-in Power Supply

The E3JK series of photoelectric sensors from Omron have a built in power supply. This series of photoelectric sensors have a high power and visible red LED for all models enabling easy alignment and long sensing distance.

Relay output (all voltage)
Red LED that makes the spot visible
Large indicators that can be seen even from a distance
Improved operability, enlarged sensitivity adjuster and operation selector
ABS housing

Specificaties
Kenmerk Waarde
Sensor Style Block
Detection Type Through Beam (Emitter and Receiver)
Detection Range 40 m
Output Type Relay
Electrical Connection 5-Wire Cable 2m
Maximum AC Voltage 240V
Maximum DC Voltage 240V
Terminal Type Wire Lead
Light Source LED
IP Rating IP64
Response Time 20 ms
Housing Material ABS
Series E3JK
Maximum Operating Temperature +55°C
Minimum Operating Temperature -25°C
18 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
111,70
(excl. BTW)
135,16
(incl. BTW)
Aantal stuks
Per stuk
1 +
111,70 €
Related Products
Two-part photo sensor rated to IP66 with LED ...
Description:
Two-part photo sensor rated to IP66 with LED status indication. Upper section contains optics and electronics, base section has terminal connections. The base section can remain in place when changing the sensor. Relay output, light ON/dark ON selectable20mm cable gland ...
Complete family of sensors, all housed in the ...
Description:
Complete family of sensors, all housed in the compact right angle 18 mm threaded housing designed for long service life in wet environmentsChemically robust epoxy encapsulated plastic sensors for wash-down applications typically found in the food and beverage industryEpoxy encapsulation ...
Receiver devices for use with M12 laser transmitters, ...
Description:
Receiver devices for use with M12 laser transmitters, Item 1Housing design reduces mounting depth compared to standard barrel sensorsPlastic housing - M18 or M30 front 'nose' mount2 status LEDsPNP outputs with full protection; switch plus alarm2m pre-cabled or M12 connector10-30Vdc ...
Optosensors for the food industry and factory automationProtection ...
Description:
Optosensors for the food industry and factory automationProtection rating: IP68High chemical resistance thanks to use of special materials2 different connection techniquesEasy assembly through snap-fitting to V4A mounting baseCompatible 4-pole M8 cable, e.g.: RS stock no.: 282-928.