- RS-stocknr.:
- 307-4111
- Fabrikantnummer:
- BEF-1SHABAAL4
- Fabrikant:
- Sick
2 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 117,52
(excl. BTW)
€ 142,20
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 117,52 |
5 + | € 112,75 |
- RS-stocknr.:
- 307-4111
- Fabrikantnummer:
- BEF-1SHABAAL4
- Fabrikant:
- Sick
Datasheets
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- DE
Productomschrijving
MSL Safety Light Barriers - Perimeter and Access Guarding
The MSL 2 and 3 beam devices are used for perimeter and access guarding where the hazard is considered high risk requiring a safety device according to EN954 Category 4. The MSL system is available in two formats, separate sender and receiver units or a combined sender-receiver unit with a reflector
Short response time (20ms)
Supply voltage; 24Vdc
Plug in terminal strip and PG gland for easy connection
Optical synchronisation between sender and receiver
External device monitoring
Muting option
Restart input
Small housing profile 52mm x 55mm
2 PNP OSSD (Output Signal Switching Device) outputs, monitored
IP65 rated
Tested and approved to type 4 for Europe, USA and Japan
Mounting brackets and angled plug for muting module input available separately (see accessories)
Supply voltage; 24Vdc
Plug in terminal strip and PG gland for easy connection
Optical synchronisation between sender and receiver
External device monitoring
Muting option
Restart input
Small housing profile 52mm x 55mm
2 PNP OSSD (Output Signal Switching Device) outputs, monitored
IP65 rated
Tested and approved to type 4 for Europe, USA and Japan
Mounting brackets and angled plug for muting module input available separately (see accessories)
Applications:
Access guarding, perimeter guarding, palletisers/wrappers, punching machines, robot cells
Note
Installation and operation of this safety device must be in strict accordance with accompanying operating instruction. Further guidance on the use of Active Opto-electronic Protective Devices (AOPD) is available from Health & Safety Executive guidance note HSG180.
Perimeter and Access Guard
Specificaties
Kenmerk | Waarde |
---|---|
Accessory Type | Mounting Kit |
For Use With | M4000 Series |