Hanna Instruments PP pH Analysis Electrode Gel with DIN Interface

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: RO
Productomschrijving

Multi-Parameter, Single Probe Water Testers

These portable meters are for field measurement of pH, conductivity and TDS. With a choice of 3 measurements.

Built within a rugged housing for extra durability in the field
Simple calibration - one point for both pH and conductivity/TDS modes
One replaceable probe used for all measurements - no need to switch probes for measurement mode changes
Automatic temperature compensation
Battery low indicator

Note

Probe is supplied and is stainless steel, not plastic as shown.

Supplied with

probe; pH7 buffer (20ml); EC and TDS calibration solutions (20ml each); 9V battery; instruction manual.

Specificaties
Kenmerk Waarde
Measurement Range 0 → 60 °C
Electrode Type Conductivity, PH, Total Dissolved Solids
Material Gel
Probe Type PP
Functions Conductivity, PH, Temperature, Total Dissolved Solids
Interface Type DIN
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
Was 160,00 €
110,19
(excl. BTW)
133,33
(incl. BTW)
Aantal stuks
Per stuk
1 +
110,19 €
Related Products
Combination epoxy bodied electrode for REDOX measurements fitted ...
Description:
Combination epoxy bodied electrode for REDOX measurements fitted with 1m cable and BNC connectorPlatinum sensor with cloth reference junction rated from 0 to +80°CSolid Ag/AgCL electrolyte withstands 3 bar (maximum).
For students and researchers alike, requiring a sturdy ...
Description:
For students and researchers alike, requiring a sturdy and compact pH Meter Hannah Instruments offers the HI-98103 (214-855)Featuring a clear LCD display, buffer recognition, stability indicator, automatic shut off, low battery indicator all within a pocket sized device. This tester ...
High-end instrument, immersible to a depth of 1 ...
Description:
High-end instrument, immersible to a depth of 1 metre (IP 67).ABS case, non-slip and buoyant.Large LCD display gives pH values and temperature at the same time.Single or double point calibration, simplified by graphical symbol.Error symbol if calibration or electrode plug ...
These meters, powered by plug-in mains adaptors, can ...
Description:
These meters, powered by plug-in mains adaptors, can be hung above samples, to continuously display readings. Sealed to IP67. LED alarm and set pointCalibration pointsMoulded hook for easy installationA replacement pH probe is available separatelyWeight (g) : 150.