SEC1110I-A5-02, Smart Card Interface Smart Card 16-Pin QFN

  • RS-stocknr. 144-5873
  • Fabrikantnummer SEC1110I-A5-02
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TH
Productomschrijving

SEC1110/1210 Smart Card to USB/SPI/UART Bridges

The Microchip SEC1110/1210 family of devices are Smart Card Bridge ICs with USB, SPI and UART interfaces. Through an effective combination of hardware and software the SEC1110 and SEC1210 offer a high-performance customisable solution. The SEC1110/1210 devices are certified to the latest USB and EMV standards to ensure interoperability with the latest and legacy Smart Card systems alike.

To simplify the development of custom USB-based applications these devices integrate USB Chip Card Interface Device (CCID) firmware. Also on-board is One-Time Programmable memory which can be utilised to host custom firmware or device data.

Features

Fully compliant with Smart Card standards: ISO/IEC 7816, EMV 4.2/4.3, ETSI TS 102 221 and PC/SC
USB, SPI or UART host interface
Dedicated hardware for performance
Low standby and dynamic power
OTP memory for code and custom configuration data
Versatile ETU rate generation, supporting current and proposed rates (to 826 Kbps and beyond)

USB (Universal Serial Bus) - Microchip

Specificaties
Kenmerk Waarde
Peripheral Type Smart Card
Number of Timer/Counters 3
Mounting Type Surface Mount
Package Type QFN
Pin Count 16
Dimensions 5.1 x 5.1 x 0.95mm
Length 5.1mm
Width 5.1mm
Height 0.95mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +85 °C
Minimum Operating Supply Voltage 3 V
Minimum Operating Temperature -40 °C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 31/01/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Tray of 490)
1,671
(excl. BTW)
2,022
(incl. BTW)
Aantal stuks
Per stuk
Per tray*
490 +
1,671 €
818,79 €
*prijsindicatie
Related Products
The Atmel® SMART SAM7S/SE ARM7TDMI® Flash microcontroller (MCU) ...
Description:
The Atmel® SMART SAM7S/SE ARM7TDMI® Flash microcontroller (MCU) offers improved performance for real-time applications. They feature high-speed Flash and SRAM, with an extensive peripheral set that includes USB 2.0 Device, USART, SPI, SSC, TWI, and an 8-channel 10-bit ADC, in ...
The Atmel ATmega32U4 Microcontroller is an 8-bit megaAVR ...
Description:
The Atmel ATmega32U4 Microcontroller is an 8-bit megaAVR device based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle the ATmega32U4 achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and speed.The ATmega32U4 ...
Based on the ARM® Cortex®-M3 core, the Atmel® ...
Description:
Based on the ARM® Cortex®-M3 core, the Atmel® SMART SAM3X Flash-based microcontroller (MCU) bring Enhanced connectivity by adding Ethernet, dual CAN and high-speed USB (HS USB) MiniHost and device with on-chip physical layer (PHY). The series also includes QTouch capacitive ...
ATSAMD21 ARM® Cortex®-M0+ Microcontrollers are SMART™ ARM-based microcontrollers ...
Description:
ATSAMD21 ARM® Cortex®-M0+ Microcontrollers are SMART™ ARM-based microcontrollers designed for migration with identical peripheral modules, hex compatible code, identical linear address map and pin compatible migration paths between all devices within the SMART™ series. The microcontrollers also contain support for ...