- RS-stocknr.:
- 213-3059
- Fabrikantnummer:
- PEX2IDE
- Fabrikant:
- StarTech.com
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 26/04/2024, met een levertijd van 2 à 3 werkdagen.
Toegevoegd
Prijs Per stuk
€ 32,20
(excl. BTW)
€ 38,96
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 32,20 |
- RS-stocknr.:
- 213-3059
- Fabrikantnummer:
- PEX2IDE
- Fabrikant:
- StarTech.com
Datasheets
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- TW
Productomschrijving
StarTech.com IDE Adapter Card, PCIe Bus Type, 133Mbps Transfer Rate - PEX2IDE
Convert your PCIe ports to IDE channels with this adapter card from StarTech.com. Its dual-channel IDE port can support two drives at the same time, making it a space-efficient option. You'll find adapter cards like this used in desktop computers to connect motherboards to disk storage devices such as CD-ROM.
Supports commonly used operating modesThis component offers support for programmable I/O and Ultra DMA 33/66/100/133 operating modes, for versatility.
Plug-and-play operationFor fast and easy installation, the unit automatically identifies PCIe modes.
High transfer rateThanks to transfer speeds up to 133Mbps, data transmission is reliably quick.
Plug-and-play operationFor fast and easy installation, the unit automatically identifies PCIe modes.
High transfer rateThanks to transfer speeds up to 133Mbps, data transmission is reliably quick.
• Single PCIe port for connecting to legacy drives
• Offers support for ATA and ATAPI commands, to enable easy integration with motherboards
• Offers support for ATA and ATAPI commands, to enable easy integration with motherboards
The Startech 1 Port PCI Express IDE Controller adapter card provides a cost-effective way to use legacy drives with modern computers, by converting a PCI Express port into an IDE port.
FAQs
2-channel IDE port supports two drives
48-bit LBA support
Supports ATA/ATAPI commands
Supports UDMA 6 mode which supports transfer rates up to 133 MBps
Includes a low profile installation bracket
48-bit LBA support
Supports ATA/ATAPI commands
Supports UDMA 6 mode which supports transfer rates up to 133 MBps
Includes a low profile installation bracket
What addressing scheme does this unit use?This unit supports a 48-bit logical block address scheme to enable backward compatibility with older devices.
Specificaties
Kenmerk | Waarde |
---|---|
Type | PCI Express Controller Adapter Card |
Supported Form Factor | IDE |
Number of Drives Supported | 0 |
Dimensions | 230 x 165 x 42mm |