12V ac 2 Output Through Hole PCB Transformer, 18VA

  • RS-stocknr. 173-9260
  • Fabrikantnummer 45051
  • Fabrikant Myrra
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Type UI 39 - 10 VA → 30 VA

Secondary voltages are nominal load voltages on resistive loads.
Only the pins indicated on the wiring diagram "physically" exist.

Standards

IEC 742, VDE 0551, SEV 1003

Approvals

UL 506

Encapsulated – Toroidal

Note

Fixing screws not provided

Specificaties
Kenmerk Waarde
Secondary Voltage Rating 12V ac
Power Rating 18VA
Primary Voltage Rating 230V ac
Number of Outputs 2
Length 68mm
Width 57mm
Depth 27mm
Dimensions 68 x 57 x 27mm
Weight 405g
Mounting Type Through Hole
Maximum Temperature +50°C
Minimum Operating Frequency 50Hz
Maximum Operating Frequency 60Hz
91 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
14,70
(excl. BTW)
17,79
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
14,70 €
25 - 49
12,99 €
50 - 99
9,70 €
100 - 249
9,01 €
250 +
8,40 €
Related Products
Fully shrouded bobbins Extra pins for secure board ...
Description:
Fully shrouded bobbins Extra pins for secure board mounting 100% electrical and flash tested Tested in accordance with BS3535 and EN 60 742.
RS Pro PCB low profile transformers are low ...
Description:
RS Pro PCB low profile transformers are low voltage transformers with a twin 115 V ac 50/60 Hz primary winding. These PCB transformers are compact and low height, have independent secondary windings suitable for series/ parallel connection to give output ...
Twin 115Va.c. 50 to 60Hz primary windings for ...
Description:
Twin 115Va.c. 50 to 60Hz primary windings for series or parallel connectionTwin secondary windings for series or parallel connectionLow profile compact designVacuum epoxy resin moulded to UL94-V0 ratingDouble section glass fibre reinforced polyamide bobbins100% electrical and flash testedLow inter-winding ...
230Va.c. 50 to 60Hz primarySingle or twin secondary ...
Description:
230Va.c. 50 to 60Hz primarySingle or twin secondary windings for series or parallel connection (For conformance reasons,0.35 to 3.2VA transformers with 2 x 15 and 2 x 18V outputs and all transformers with 2x 24V outputs should not have their ...