24V ac 2 Output Through Hole PCB Transformer, 3VA

  • RS-stocknr. 173-8908
  • Fabrikantnummer 45018
  • Fabrikant Myrra
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Type UI 30 - 3 VA → 10 VA

Secondary voltages are nominal load voltages on resistive loads.
Only the pins indicated on the wiring diagram "physically" exist.

Standards

IEC 742, VDE 0551, SEV 1003

Approvals

UL 506

Encapsulated – Toroidal

Note

Fixing screws not provided

Specificaties
Kenmerk Waarde
Secondary Voltage Rating 24V ac
Power Rating 3VA
Primary Voltage Rating 230V ac
Number of Outputs 2
Length 53mm
Width 44mm
Depth 17mm
Dimensions 53 x 44 x 17mm
Weight 125g
Mounting Type Through Hole
Maximum Temperature +70°C
Minimum Operating Frequency 50Hz
Maximum Operating Frequency 60Hz
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
7,54
(excl. BTW)
9,12
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
7,54 €
25 - 49
7,21 €
50 - 99
6,87 €
100 - 249
6,54 €
250 +
6,19 €
Related Products
Single and twin secondary windings for series or ...
Description:
Single and twin secondary windings for series or parallel connectionVacuum resin moulded to UL94-V0 ratingLow inter-winding capacitanceLow radiated noise100% electrical and flash testedExtra fixing points for secure board mounting (25 VA and 36 VA).
230Va.c. 50 to 60Hz primarySingle or twin secondary ...
Description:
230Va.c. 50 to 60Hz primarySingle or twin secondary windings for series or parallel connection (For conformance reasons,0.35 to 3.2VA transformers with 2 x 15 and 2 x 18V outputs and all transformers with 2x 24V outputs should not have their ...