12V ac 2 Output Through Hole PCB Transformer, 10VA

  • RS-stocknr. 170-7420
  • Fabrikantnummer VC 10/2/12
  • Fabrikant Block
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

PCB Mount 230Vac Primary VC/VCM Series

Single and twin secondary windings for series or parallel connection
Vacuum resin moulded to UL94-V0 rating
Low inter-winding capacitance
Low radiated noise
100% electrical and flash tested
Extra fixing points for secure board mounting (25 VA and 36 VA)

Note

To conform to VDE 0550,UL506 all transformers with 2 x 24V outputs should not have their secondaries connected in series.

Standards

EN 61 558 IEC 61558

Approvals

ENEC, UL recognised

Approvals

VDE; UL

Standards

EN 61 558; IEC 61558

Specificaties
Kenmerk Waarde
Secondary Voltage Rating 12V ac
Power Rating 10VA
Primary Voltage Rating 230V ac
Number of Outputs 2
Length 51mm
Width 34.6mm
Depth 43mm
Dimensions 51 x 34.6 x 43mm
Weight 280g
Mounting Type Through Hole
Efficiency 74%
Maximum Temperature +40°C
315 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Tray of 35)
4,693
(excl. BTW)
5,679
(incl. BTW)
Aantal stuks
Per stuk
Per tray*
35 +
4,693 €
164,255 €
*prijsindicatie
Related Products
PCB mounting mains transformers with a single 230Va.c. ...
Description:
PCB mounting mains transformers with a single 230Va.c. or twin 115Va.c. 50/60Hz primary winding. Independent secondary windings may be connected in series or parallel to give a wide range of output voltage and current options. Fully shrouded bobbins Extra pins ...
RS Pro PCB low profile transformers are low ...
Description:
RS Pro PCB low profile transformers are low voltage transformers with a twin 115 V ac 50/60 Hz primary winding. These PCB transformers are compact and low height, have independent secondary windings suitable for series/ parallel connection to give output ...
Secondary voltages are nominal load voltages on resistive ...
Description:
Secondary voltages are nominal load voltages on resistive loads.Only the pins indicated on the wiring diagram "physically" exist.
Twin 115Va.c. 50 to 60Hz primary windings for ...
Description:
Twin 115Va.c. 50 to 60Hz primary windings for series or parallel connectionTwin secondary windings for series or parallel connectionLow profile compact designVacuum epoxy resin moulded to UL94-V0 ratingDouble section glass fibre reinforced polyamide bobbins100% electrical and flash testedLow inter-winding ...