CBSS12MB11, 17.3mm High Nylon PCB Support Pillar for 4mm PCB Hole
- RS-stocknr.:
- 543-917
- Fabrikantnummer:
- CBSS12MB11
- Fabrikant:
- Richco
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 543-917
- Fabrikantnummer:
- CBSS12MB11
- Fabrikant:
- Richco
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- US
Productomschrijving
Stacking PCB Pillars
These moulded natural coloured nylon 66 pillars are for mounting or spacing PCBs
The stacking pillars may be used to stack PCBs one above the other; the last board being retained by the caps
Fixing hole 4 mm
PCB Thickness 1.6mm
Spacing between boards is approximately 19 mm
These are supplied in a pack containing 25 spacers and 25 caps
The stacking pillars may be used to stack PCBs one above the other; the last board being retained by the caps
Fixing hole 4 mm
PCB Thickness 1.6mm
Spacing between boards is approximately 19 mm
These are supplied in a pack containing 25 spacers and 25 caps
Specificaties
Kenmerk | Waarde |
|---|---|
| Body Height | 17.3mm |
| PCB Hole Diameter | 4mm |
| PCB Thickness | 1.6mm |
| Material | Nylon |