500-003 PCB Etcher

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

PCB Preparation Single Tanks - Process, Wash or Etch

Mega Electronics PCB etching tank with thermostat controlled heater and pump which forces air through two bubble bars to provide efficient and even etching. PCBs are safely and tidily lowered into the tank using the lid basket and are then drained and lifted from the tank when worked. The tank is designed to provide a high degree of safety to users, having splash proof controls and a syphon pump to safely empty the tank and avoid spillages.

Recommended chemistry:
Heated process: Developer 690-849; Tin Plating 567-812
Bubble Etch: Fine Etch Crystals 363-6573 or Ferric Pellets 367-0056

Internal Tanks Anti-leak one-piece polypropylene
Outer Wrapper 6mm Polypropylene
Max. Board Size 315 x 260 mm
Tank Capacity 5 litres
Operating Voltage 240V, 50Hz
User Thermostat Range 10°C to 55°C

Supplied with

PCB board holder with retaining clips. Heated Process & Bubble Etch Tanks also include an IEC mains lead and siphon for emptying

PCB Development Equipment

These Processing Tanks comprise of a number of different versions to enable the following complete 7-stage production process to be undertaken:,1. Develop, 2. Wash, 3. Etch, 4. Wash, 5. Resist Strip, 6. Wash, 7. Chemical Tin.

Specificaties
Kenmerk Waarde
Number of Tanks 1
Tank Types Included Etching
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 29/11/2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
443,14
(excl. BTW)
536,20
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
443,14 €
5 - 9
328,37 €
10 - 39
311,98 €
40 +
296,47 €
Related Products
The PCT-100 is designed to provide extra heat ...
Description:
The PCT-100 is designed to provide extra heat capacity for demanding applications such as lead free, multi-layered boards and assemblies with large ground plates by directly targeting the underside of the PCB. This direct targeting provides a thermal boost for ...
The Cif Athelec assembly manipulator is a new ...
Description:
The Cif Athelec assembly manipulator is a new manual system for the placement of SMT-components. This product has a perfect ergonomic station including a lot of functions. It allows comfortable choosing components and their placing all over the workplace with ...
These Processing Tanks comprise of a number of ...
Description:
These Processing Tanks comprise of a number of different versions to enable the following complete 7-stage production process to be undertaken:,1. Develop, 2. Wash, 3. Etch, 4. Wash, 5. Resist Strip, 6. Wash, 7. Chemical Tin. Twin tank combines Bubble ...
Fixing a stencil is fast and easy with ...
Description:
Fixing a stencil is fast and easy with our auto-tensioner system. The stencil printer can be used for one as well as two sided PCB’s, even if there are already components on one side. Manual operated stencil printer for SMT ...