Bending, Cutting Hand-Driven Machine

Wetgeving en conformiteit
Land van herkomst: GB

Component Lead, Cut/Bend Machine, Hand Driven

A component lead cut and bend machine for the mass production of pre-formed components
The machine has high carbon steel cutting wheels designed for cutting copper leads
Accepts bandoliered components mounted on a 5mm pitch and includes a real holder for feeding components directly off a reel into the machine
The machine has a strong steel and aluminium frame construction, and can be mounted on a plinth (supplied) to give sufficient height for the operating handle to be turned freely in any mounted position (mounting bolts and nuts are provided)
Cut and bend setting is very straightforward with scales on the machine to set lead pitch and length of down lead
The range of allowable component settings is given in the drawing
Full instructions are included with the machine
The machine is capable of handling 40000 components per hour, typical life 2 million components; however this life will be reduced for components with steel lead e.g. some diodes
For safety in operation the cut and bend mechanism is fully guarded with a bandolier tape separator to prevent jamming
Dimensions (mm); H.175 (with plinth250), W.200 x D.165, Wt. 4.2kg


PCB Assembly Equipment

Kenmerk Waarde
Task Type Bending, Cutting
Tool Type Hand-Driven Machine
Maximum Cut Length 13mm
Maximum Lead Diameter Capacity 1mm
Minimum Bend Length 1.2mm
Minimum Cut Length 4mm
Minimum Lead Diameter Capacity 0.4mm
Cut Length Range 4 → 13mm
Bend Length Range Minimum of 1.2mm
Lead Diameter Capacity Range 0.4 → 1mm
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
4 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
638,48 €
Related Products
Allows various size and shape holes to be ...
Allows various size and shape holes to be made from 7.5mm diameter upwardsSuitable for cutting into various case materials, front panels, printed circuit boards, etc.