ERNI 173 Series Housing for use with DIN 41612 Connector

  • RS-stocknr. 186-8093
  • Fabrikantnummer 173.052
  • Fabrikant ERNI
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: SI
Productomschrijving

DIN 41612 / IEC 603-2, cable housing KSG 173 / 253 for EN60603-2

This range of cable housing fulfils the demand for fully insulated compact housing that can take DIN 41612 male and female connectors.
Male and female connectors protected from mechanical loading in this way are suitable for forming all electrical interfaces, whether as transfer plugs, code plugs, test plugs or jumper plugs.
The cable housing is led over suitable guiding components, which help it to connect and at the same time allow space for encoding.

Universal cable housing was developed in close cooperation with leading users.
Fully insulated, sturdy housing
Switch off all mechanical loading on the connector when inserting/withdrawing or when in use
Lifting screws help to easily overcome inserting / withdrawing forces (to be used consecutively)
Constructed with suitable guiding components on both the tending side and wiring plane of the sub-rack
Can be used for both signal and current transfer between sub-racks
A choice of three different cable exits
Safe strain relief
Encoding retrofittable
Cable housing delivered as packaged installation kit – without guiding components

KSG 173

For Type B, C, D, H11, Q, R, M male and female connectors
Housing width 15.24 mm (3 TE)
For Type H15 female connectors
Housing width 15.24 mm (3 TE)
For Type E160 male and female connectors
Housing width 20.32 mm (4 TE)

KSG 253

For Type C female connectors with insulation displacement connection
For ribbon cable; housing width 15.24 mm (3 TE)

Approvals

UL,VG,CSA,CECC 75101-801

Specificaties
Kenmerk Waarde
Accessory Type Housing
For Use With DIN 41612 Connector
Series 173
27 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
150 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
11,35
(excl. BTW)
13,73
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
11,35 €
15 - 49
10,25 €
50 - 99
9,20 €
100 - 249
8,90 €
250 +
8,40 €
Related Products
The Hermaphoroditic Blade and Receptacle Connector is an ...
Description:
The Hermaphoroditic Blade and Receptacle Connector is an SMT connector, intended for use with in-line board-to-board applications. Applications include: LED lighting controls, LED lighting strips, channel lettering. For suitable blade contact see stock no. 686-0921, for socket contact see stock ...
DIN 41612 connectors for interconnection in all 19in ...
Description:
DIN 41612 connectors for interconnection in all 19in Eurocard racking systems. Housings have insert options for side or rear cable entryOne LH and one RH lever (or bracket as appropriate) is included per set of levers (or brackets), see for ...
KSG 200 for Sub-D connectors to DIN 41 ...
Description:
KSG 200 for Sub-D connectors to DIN 41 652 and MIL -C24308 Shielding plates with a special lamellar configuration at shield transition pointsAssured ESD protectionEMC ensured by EMI/FRI shieldingReliable strain reliefSimple assembly/disassembly.
A range of plug housings, locking trays, cable ...
Description:
A range of plug housings, locking trays, cable connections and other accessories that are compatible with RP618/622 and RP300 series connectors. The locking trays and plug housings with an angled entry are available in metal or plastic.