JAE Dummy Pin for use with MX23A Series Compact Type Low-Profiled Waterproof Connector

  • RS-stocknr. 731-9036
  • Fabrikantnummer M120-55780
  • Fabrikant JAE
Wetgeving en conformiteit

MX23A 40 Way Socket Connector Components

The complete JAE MX23A 40 way connector requires:,Housing socket stock number 731-9020, Orange Front Cap stock number 731-9023, Socket Contacts (Crimp) stock number 731-9027, and optionally Dummy Pins (for use when the socket housing does not have all cavities loaded) stock number 731-9036


For JAE MX23A mating headers see stock number 435-774 typical.
For JAE MX23A Crimp tool see stock number 437-083

JAE MX23A Range

JAE MX23A Waterproof Connectors can be used for wide range sealed equipment in the automotive industry including automobiles, motorcycles and so on. The JAE MX23A Waterproof Connector is sealed by having a Sealing Ring in the mating area and by a Grommet in the wire crimping area for full protection against the ingress of water.
JAE MX23A Waterproof Connectors are a low profiled type with a board mounting height of 18.3 mm and a socket connector height of 22.2 mm maximum.
JAE MX23A Waterproof Connectors have a double fin structured socket contact for high reliability. The socket contact also has a large chamfer on the front-edge to prevent damage to the grommet.
JAE MX23A Waterproof Connectors ensure complete insertion of the socket contact into its housing due to any incomplete insertions being easily detected during the front cap mounting process.

Kenmerk Waarde
Accessory Type Dummy Pin
For Use With MX23A Series Compact Type Low-Profiled Waterproof Connector
Series MX23A
4580 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 90
0,237 €
2,37 €
100 - 240
0,194 €
1,94 €
250 - 990
0,188 €
1,88 €
1000 - 4990
0,182 €
1,82 €
5000 +
0,18 €
1,80 €