Molex C-GRID Series Keying Plug

  • RS-stocknr. 360-6853
  • Fabrikantnummer 15-04-0292
  • Fabrikant Molex
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Socket Housings, 90142 Series

Mates with 90122; 90130 and 90131 Series headers, use with 90119 Series terminals

Standards

DIN 41651; HE13/14

2.54mm Molex C-Grid III Range

Specificaties
Kenmerk Waarde
Accessory Type Polarizing Key
For Use With 2.54mm Pitch C-Grid and SL Connectors
Series Number 4161
Series MX50
1910 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
5900 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
0,238
(excl. BTW)
0,288
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 190
0,238 €
2,38 €
200 - 740
0,20 €
2,00 €
750 - 2990
0,171 €
1,71 €
3000 - 5990
0,143 €
1,43 €
6000 +
0,133 €
1,33 €
*prijsindicatie
Related Products
MTA-156 (Mass Termination Assembly) 3.96 mm pitch connector ...
Description:
MTA-156 (Mass Termination Assembly) 3.96 mm pitch connector system for labour and cost saving mass termination of wires in wire-to-board and wire-to-wire applications. These MTA-156 connectors are based on IDC (insulation displacement contact) technology allowing one-step assembly and eliminating the ...
MTA-156 (Mass Termination Assembly) 3.96 mm pitch connector ...
Description:
MTA-156 (Mass Termination Assembly) 3.96 mm pitch connector system for labour and cost saving mass termination of wires in wire-to-board and wire-to-wire applications. These MTA-156 connectors are based on IDC (insulation displacement contact) technology allowing one-step assembly and eliminating the ...
A range of AMP-LATCH IDC ribbon cable wire-to-board ...
Description:
A range of AMP-LATCH IDC ribbon cable wire-to-board DIP plug connector assemblies complete with cover. These AMP-LATCH IDC ribbon cable DIP plug connectors are PCB vertical mounting and are available in the following options:Part numbers x-746611-x have black housings with ...
A range of low profile 1.27 mm Pitch ...
Description:
A range of low profile 1.27 mm Pitch Picoflex Headers for use with 90327 Series housings, see stock number 324-8047 typical. Fitted with friction lock, polarisation and stamped contacts with in-line flat tabsRigid solder tails require 0.8mm hole.