Mega-fit TPA 4P 94 V-0 Nat Retainer

  • RS-stocknr. 200-5684
  • Fabrikantnummer 105415-0004
  • Fabrikant Molex
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

The Molex Mega-fit 5.70mm pitch Terminal Position Assurance (TPA) Retainer has maximum 1 circuit loaded and has a single row. It has a lock to mating part and the material is nylon with natural colour.

RoHS compliant
Operating Temperature Range: -40° to +105°C, -40° to +120°C
UL 94V-0, Glow-Wire Capable

Specificaties
Kenmerk Waarde
Accessory Type Terminal Position Assurance Retainer
For Use With "Covers the requirements for the application of Mega-Fit 5.70 mm pitch wire to
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 08/10/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Bag of 3000)
0,069
(excl. BTW)
0,083
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
3000 - 6000
0,069 €
207,00 €
9000 +
0,063 €
189,00 €
*prijsindicatie
Related Products
Two-piece backshells for use with the 5.7mm Mega-Fit ...
Description:
Two-piece backshells for use with the 5.7mm Mega-Fit dual row receptacle housings to provide strain relief. These Mega-Fit receptacle backshells have a hermaphroditic dseign and are availble as standard 94V-0 versions (part numbers 200122-00xx) or with Glow Wire Compliance per ...
Universal MATE-N-LOK plug or cap housing strain reliefs ...
Description:
Universal MATE-N-LOK plug or cap housing strain reliefs and cap housing adaptors. The cap housing adaptors secure the cap housing strain reliefs to the housings to prevent the strain relief halves from “drawing in” when the screws are being torqued ...
The Economy Power II (EP II) Connector 3.96 ...
Description:
The Economy Power II (EP II) Connector 3.96 TPA Breakaway Retainer from TE Connectivity is used with the TPA Housings, see stock number 796-3006 typical. The EP II 3.96 Breakaway Retainer is required to give the TPA feature which prevents ...
Aries offers a complete line of DIP headers ...
Description:
Aries offers a complete line of DIP headers and covers,useful for mounting components such as resistors,diodes, etc. Four cover heights provide mounting of 3.18 mm highto 19.05 mm high components.Pin positions are numbered on cover. Polarizationnotch identifies Pin 1.Specifically designed ...