Solartron Metrology MODBUS Interface Module for use with Digital Measurement System, 0 → 10 V

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Orbit 3 Modim Modbus Interface Module

The Orbit 3 MODIM modbus interface module provides all users an easy gateway between MODBUS PLC’s and the Orbit 3 digital measurement system.. This is a highly accurate and flexible measurement system. The Modbus interface module also interfaces to any sensor with an analogue output including a wealth of other linear measurement sensors. This allows you to use the system for temperature, pressure, force, rotary measurement and linear displacement. All of these process variables to a PLC though just one simple Modbus communications interface.

MODBUS RTU up to 115200 baud
Access complex sensor networks with varying interfaces through a set of MODBUS parameters in a single device
Connects to all Solartron gauging probes, displacement, Orbit LT and Prbit LTH
Simple network setup via a PC application
Sealing – IP43
Hardware serial interface – RS485
Network protocol – MODBUS RTU SLAVE
Baud rates up to 115,200
Orbit modules - Linear Displacement Sensors range 0.25mm to 300mm. Analogue Input Modules 0-10V, 4- 20mA. Rotary Encoder Modules and Non Contact Laser Modules
Storage temperature -20 to +70°C

Approvals

EN61000-6-3 and EN61326

Specificaties
Kenmerk Waarde
For Use With Digital Measurement System
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 02/07/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
461,95
(excl. BTW)
558,96
(incl. BTW)
Aantal stuks
Per stuk
1 +
461,95 €
Related Products
Energymanagement-Device CMS-121DR 18mm Open-core Sensor 40A. The Circuit ...
Description:
Energymanagement-Device CMS-121DR 18mm Open-core Sensor 40A. The Circuit Monitoring System (CMS) is a ultra-compact and highperformance multichannel measurement system for AC and DC branch monitoring.It represents a complete solution for monitoring electrical parameters in distribution panels, enabling power ...
The ICP DAS I-7188EX Embedded Internet/Ethernet Controller, focuses ...
Description:
The ICP DAS I-7188EX Embedded Internet/Ethernet Controller, focuses in Embedded Control applications. It supports various TCP/IP features, including TCP, UDP, IP, ICMP, and ARP. Included is a remote configuration and reloadable operating software, making it perfect for your application. All ...
Professional range of GX series EtherCAT junction slaves ...
Description:
Professional range of GX series EtherCAT junction slaves from Omron. The EtherCAT junction slaves are designed for open network realize super high-speed machine control. With the JC03 and JC06 junction slaves the efficiency in assembling and wirings are improved, shortening ...
Logo CMR2040 Communication Module for Connect. Logo 8 ...
Description:
Logo CMR2040 Communication Module for Connect. Logo 8 to LTE Net 1 RJ45 Port for Ind. Ethernet-Connection to Logo 8, 2xdi, 2xdo, Read/Write-Access to Logo-Variables, SMS Send/Receive, Email Send, Position Recognize. GPS, Time Syn./Forwarding with Real Time Clock, Config./DIAG.PER Web-Interface, ...