Ohmite, 50Ω 90W Wire Wound Chassis Mount Resistor WFH90L50RJE ±5%
- RS-stocknr.:
- 893-1072
- Fabrikantnummer:
- WFH90L50RJE
- Fabrikant:
- Ohmite
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 893-1072
- Fabrikantnummer:
- WFH90L50RJE
- Fabrikant:
- Ohmite
Datasheets
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- DK
Productomschrijving
Ohmite WFH Series
Ohmite WFH series flat core winding technology offers wirewound heatsinkable resistors with a very low profile, and superior thermal transfer characteristics when compared to conventional aluminium housed wirewound resistors. Close mounting of heat sensitive components is possible due to only a slight rise of the temperature on the aluminium profile. No heat sink compound is required because of large mounting surface.
Solder lug, wire, and “Fast-on” amp terminations
Multiple resistors in one profile possible
Custom wire lengths available
Multiple resistors in one profile possible
Custom wire lengths available
Specificaties
Kenmerk | Waarde |
|---|---|
| Resistance | 50Ω |
| Power Rating | 90W |
| Series | WFH |
| Package/Case | Aluminium Housed |
| Tolerance | ±5% |
| Technology | Wire Wound |
| Minimum Operating Temperature | -40°C |
| Minimum Temperature Coefficient | +50ppm/°C |
| Maximum Temperature Coefficient | +150ppm/°C |
| Dimensions | 70 x 51 x 12.6mm |
| Overall Length | 70mm |
| Overall Width | 51mm |
| Overall Height | 12.6mm |