Wirewound Resistor 50 Ohms

  • RS-stocknr. 845-9677
  • Fabrikantnummer RH01050R00FE02
  • Fabrikant Vishay
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MX
Productomschrijving

10 Watt RH010 Series ±1%

The Vishay RH010 series wirewound chassis mount resistor has a complete welded and moulded construction for total environmental protection in aluminium housing. These resistors mount directly onto a chassis to utilize heat-sink effect. This range of wirewound resistors offers high stability at conventional power ratings and flat marking surface for easy identification.

Mounts on chassis to utilize heat-sink effect
Moulded construction for total environmental protection
High Stability <0.05% Year
Resistance Tolerance 1%

Specificaties
Kenmerk Waarde
Resistance 50 Ω
Power Rating 12.5W
Series RH
Tolerance ±1%
Technology Wire Wound
Termination Style Axial
Minimum Operating Temperature -55°C
Maximum Operating Temperature +250°C
Minimum Temperature Coefficient -20ppm/°C
Maximum Temperature Coefficient +20ppm/°C
Temperature Coefficient ±20ppm/°C
Dimensions 19.05 x 20.32 x 9.91mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 16/10/2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
2,19
(excl. BTW)
2,65
(incl. BTW)
Aantal stuks
Per stuk
1 - 49
2,19 €
50 - 99
1,67 €
100 - 249
1,45 €
250 +
1,25 €
Related Products
The Vishay RH050 series wirewound chassis mount resistor ...
Description:
The Vishay RH050 series wirewound chassis mount resistor has a complete welded and moulded construction for total environmental protection in aluminium housing. These resistors mount directly onto a chassis to utilise heat-sink effect. This range of wirewound resistors offers high ...
Low Profile Wire-Wound DesignVery Wide Value RangeIdeal for ...
Description:
Low Profile Wire-Wound DesignVery Wide Value RangeIdeal for Power CircuitryAvailable in 1, 2 or 3 Watts.
All welded constructionCeramic coreNon-flammable cement coatingTinned copper-clad iron ...
Description:
All welded constructionCeramic coreNon-flammable cement coatingTinned copper-clad iron leads (for axial parts)High power dissipation in small volumeIdeal for pulse application.
Vishay Sfernice RTO50 series thick film, non-inductive resistors ...
Description:
Vishay Sfernice RTO50 series thick film, non-inductive resistors in TO-220 enclosuresResistors allow for dissipation of 50W when mounted onto a heatsink (nominal power of 50 W at 25 °C heat sink mounted).