- RS-stocknr.:
- 123-3557
- Fabrikant:
- RS PRO
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 123-3557
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- CN
Productomschrijving
RS Pro ISR-6051 Analog Oscilloscope
As a traditional analog oscilloscope, RS Pro ISR-6051 can immediately represent a waveform on its 6 inch CRT display. The benefit is a faster update rate. A digital storage oscilloscope needs to digitally sample a signal before that signal can be displayed. An analog oscilloscope displays the signal in real-time, with less risk of modifying any part of the original signal. Its ability to measure waveform intensity makes the analog oscilloscope an instrument of choice in some fields e.g. TV and video. The RS Pro ISR-6051 has a built-in 6-digit frequency counter, cursor and numerical readouts, making waveform observation and measurement fast and accurate. Setup save/recall enable regular setups to be recalled for ease-of-use and for production test applications.
Rise time 7/ 50 ns
8 x 10 1 cm divisions
Cursor readout measurement of ΔV, ΔT, 1/ΔT
50 Hz to 50 MHz frequency counter, 6-digits, accuracy ±0.01%
MEM save/recall of up to 10 front panel setups
TV sync triggering for automatic linear focus maintains optimum beam focus
Variable trigger hold off for stable display of periodic waveforms
ALT MAG functions (x5, x10, x20)
Trigger modes Auto, Norm, TV field and TV line
Sensitivity 1 mV to 20 V/div in 14 steps
Timebase 0.2 μs to 0.5 sec/div in 20 steps
400 V (dc + ac peak) maximum input to CH1 and CH2
Constructed to EN61010-1 (safety standard) 300V Cat II
8 x 10 1 cm divisions
Cursor readout measurement of ΔV, ΔT, 1/ΔT
50 Hz to 50 MHz frequency counter, 6-digits, accuracy ±0.01%
MEM save/recall of up to 10 front panel setups
TV sync triggering for automatic linear focus maintains optimum beam focus
Variable trigger hold off for stable display of periodic waveforms
ALT MAG functions (x5, x10, x20)
Trigger modes Auto, Norm, TV field and TV line
Sensitivity 1 mV to 20 V/div in 14 steps
Timebase 0.2 μs to 0.5 sec/div in 20 steps
400 V (dc + ac peak) maximum input to CH1 and CH2
Constructed to EN61010-1 (safety standard) 300V Cat II
Supplied with
Mains lead, instruction manual
RS Pro
Specificaties
Kenmerk | Waarde |
---|---|
Number of Analogue Channels | 2 |
Bandwidth | 50MHz |
Oscilloscope Type | Analogue |
Power Source | Mains |
Display Type | LCD |
Minimum Vertical Sensitivity | 1mV/div |
Maximum Vertical Sensitivity | 20V/div |
Minimum Time Base | 0.2µs/div |
Height | 130mm |
Weight | 7.2kg |
Maximum Time Base | 0.5s/div |
Length | 370mm |
Input Impedance | 1 MΩ |
Input Capacitance | 25 pF |
Dimensions | 370 x 275 x 130mm |
Safety Category Level | CAT I, CAT II, CAT III, CAT IV |
Rise Time | 50 ns @ 2 mV/div, 7 ns @ 20 V/div |